AWS Amazon EC2 CLI Commands

Accepts an Elastic IP address transfer. For more information, see Accept a transferred Elastic IP address in the Amazon VPC User Guide.

Accepts a request to assign billing of the available capacity of a shared Capacity Reservation to your account. For more information, see Billing assignment for shared Amazon EC2 Capacity Reservations.

Accepts the Convertible Reserved Instance exchange quote described in the GetReservedInstancesExchangeQuote call.

Accepts a request to associate subnets with a transit gateway multicast domain.

Accepts a transit gateway peering attachment request. The peering attachment must be in the pendingAcceptance state.

Accepts a request to attach a VPC to a transit gateway. The VPC attachment must be in the pendingAcceptance state. Use DescribeTransitGatewayVpcAttachments to view your pending VPC attachment requests. Use RejectTransitGatewayVpcAttachment to reject a VPC attachment request.

Accepts connection requests to your VPC endpoint service.

Accept a VPC peering connection request. To accept a request, the VPC peering connection must be in the pending-acceptance state, and you must be the owner of the peer VPC. Use DescribeVpcPeeringConnections to view your outstanding VPC peering connection requests. For an inter-Region VPC peering con

Advertises an IPv4 or IPv6 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP). You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. We recommend that you stop a

Allocates an Elastic IP address to your Amazon Web Services account. After you allocate the Elastic IP address you can associate it with an instance or network interface. After you release an Elastic IP address, it is released to the IP address pool and can be allocated to a different Amazon Web Ser

Allocates a Dedicated Host to your account. At a minimum, specify the supported instance type or instance family, the Availability Zone in which to allocate the host, and the number of hosts to allocate.

Allocate a CIDR from an IPAM pool. The Region you use should be the IPAM pool locale. The locale is the Amazon Web Services Region where this IPAM pool is available for allocations. In IPAM, an allocation is a CIDR assignment from an IPAM pool to another IPAM pool or to a resource. For more informat

Applies a security group to the association between the target network and the Client VPN endpoint. This action replaces the existing security groups with the specified security groups.

Assigns the specified IPv6 addresses to the specified network interface. You can specify specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you

Assigns the specified secondary private IP addresses to the specified network interface. You can specify specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned from the subnet's CIDR block range. The number of secondary IP addresses that

Assigns private IPv4 addresses to a private NAT gateway. For more information, see Work with NAT gateways in the Amazon VPC User Guide.

Associates an Elastic IP address, or carrier IP address (for instances that are in subnets in Wavelength Zones) with an instance or a network interface. Before you can use an Elastic IP address, you must allocate it to your account. If the Elastic IP address is already associated with a different in

Initiates a request to assign billing of the unused capacity of a shared Capacity Reservation to a consumer account that is consolidated under the same Amazon Web Services organizations payer account. For more information, see Billing assignment for shared Amazon EC2 Capacity Reservations.

Associates a target network with a Client VPN endpoint. A target network is a subnet in a VPC. You can associate multiple subnets from the same VPC with a Client VPN endpoint. You can associate only one subnet in each Availability Zone. We recommend that you associate at least two subnets to provide

Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or r

Associates an Identity and Access Management (IAM) role with an Certificate Manager (ACM) certificate. This enables the certificate to be used by the ACM for Nitro Enclaves application inside an enclave. For more information, see Certificate Manager for Nitro Enclaves in the Amazon Web Services Nitr

Associates an IAM instance profile with a running or stopped instance. You cannot associate more than one IAM instance profile with an instance.

Associates one or more targets with an event window. Only one type of target (instance IDs, Dedicated Host IDs, or tags) can be specified with an event window. For more information, see Define event windows for scheduled events in the Amazon EC2 User Guide.

Associates your Autonomous System Number (ASN) with a BYOIP CIDR that you own in the same Amazon Web Services Region. For more information, see Tutorial: Bring your ASN to IPAM in the Amazon VPC IPAM guide. After the association succeeds, the ASN is eligible for advertisement. You can view the assoc

Associates an IPAM resource discovery with an Amazon VPC IPAM. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Associates Elastic IP addresses (EIPs) and private IPv4 addresses with a public NAT gateway. For more information, see Work with NAT gateways in the Amazon VPC User Guide. By default, you can associate up to 2 Elastic IP addresses per public NAT gateway. You can increase the limit by requesting a qu

Associates a route server with a VPC to enable dynamic route updates. A route server association is the connection established between a route server and a VPC. For more information see Dynamic routing in your VPC with VPC Route Server in the Amazon VPC User Guide.

Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you n

Associates a security group with another VPC in the same Region. This enables you to use the same security group with network interfaces and instances in the specified VPC. The VPC you want to associate the security group with must be in the same Region. You can associate the security group wit

Associates a CIDR block with your subnet. You can only associate a single IPv6 CIDR block with your subnet.

Associates the specified subnets and transit gateway attachments with the specified transit gateway multicast domain. The transit gateway attachment must be in the available state before you can add a resource. Use DescribeTransitGatewayAttachments to see the state of the attachment.

Associates the specified transit gateway attachment with a transit gateway policy table.

Associates the specified attachment with the specified transit gateway route table. You can associate only one route table with an attachment.

Associates a branch network interface with a trunk network interface. Before you create the association, use CreateNetworkInterface command and set the interface type to trunk. You must also create a network interface for each branch network interface that you want to associate with the trunk networ

Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). You must specify one of the following in the request: an IPv4 CI

This action is deprecated. Links an EC2-Classic instance to a ClassicLink-enabled VPC through one or more of the VPC security groups. You cannot link an EC2-Classic instance to more than one VPC at a time. You can only link an instance that's in the running state. An instance is automatically unli

Attaches an internet gateway or a virtual private gateway to a VPC, enabling connectivity between the internet and the VPC. For more information, see Internet gateways in the Amazon VPC User Guide.

Attaches a network interface to an instance.

Attaches the specified Amazon Web Services Verified Access trust provider to the specified Amazon Web Services Verified Access instance.

Attaches an Amazon EBS volume to a running or stopped instance, and exposes it to the instance with the specified device name. The maximum number of Amazon EBS volumes that you can attach to an instance depends on the instance type. If you exceed the volume attachment limit for an instance type, th

Attaches an available virtual private gateway to a VPC. You can attach one virtual private gateway to one VPC at a time. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

Adds an ingress authorization rule to a Client VPN endpoint. Ingress authorization rules act as firewall rules that grant access to networks. You must configure ingress authorization rules to enable clients to access resources in Amazon Web Services or on-premises networks.

Adds the specified outbound (egress) rules to a security group. An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 address ranges, the IP address ranges specified by a prefix list, or the instances that are associated with a source security group. For more information,

Adds the specified inbound (ingress) rules to a security group. An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 address range, the IP address ranges that are specified by a prefix list, or the instances that are associated with a destination security group. For m

Bundles an Amazon instance store-backed Windows instance. During bundling, only the root device volume (C:\) is bundled. Data on other instance store volumes is not preserved. This action is not applicable for Linux/Unix instances or Windows instances that are backed by Amazon EBS.

Cancels a bundling operation for an instance store-backed Windows instance.

Cancels the specified Capacity Reservation, releases the reserved capacity, and changes the Capacity Reservation's state to cancelled. You can cancel a Capacity Reservation that is in the following states: assessing active and there is no commitment duration or the commitment duration has ela

Cancels one or more Capacity Reservation Fleets. When you cancel a Capacity Reservation Fleet, the following happens: The Capacity Reservation Fleet's status changes to cancelled. The individual Capacity Reservations in the Fleet are cancelled. Instances running in the Capacity Reservations at t

Cancels an active conversion task. The task can be the import of an instance or volume. The action removes all artifacts of the conversion, including a partially uploaded volume or instance. If the conversion is complete or is in the process of transferring the final disk image, the command fails an

Cancels the generation of an account status report. You can only cancel a report while it has the running status. Reports with other statuses (complete, cancelled, or error) can't be canceled. For more information, see Generating the account status report for declarative policies in the Amazon Web S

Cancels an active export task. The request removes all artifacts of the export, including any partially-created Amazon S3 objects. If the export task is complete or is in the process of transferring the final disk image, the command fails and returns an error.

Removes your Amazon Web Services account from the launch permissions for the specified AMI. For more information, see Cancel having an AMI shared with your Amazon Web Services account in the Amazon EC2 User Guide.

Cancels an in-process import virtual machine or import snapshot task.

Cancels the specified Reserved Instance listing in the Reserved Instance Marketplace. For more information, see Sell in the Reserved Instance Marketplace in the Amazon EC2 User Guide.

Cancels the specified Spot Fleet requests. After you cancel a Spot Fleet request, the Spot Fleet launches no new instances. You must also specify whether a canceled Spot Fleet request should terminate its instances. If you choose to terminate the instances, the Spot Fleet request enters the cancelle

Cancels one or more Spot Instance requests. Canceling a Spot Instance request does not terminate running Spot Instances associated with the request.

Determines whether a product code is associated with an instance. This action can only be used by the owner of the product code. It is useful when a product code owner must verify whether another user's instance is eligible for support.

Copies the specified Amazon FPGA Image (AFI) to the current Region.

Initiates an AMI copy operation. You must specify the source AMI ID and both the source and destination locations. The copy operation must be initiated in the destination Region. CopyImage supports the following source to destination copies: Region to Region Region to Outpost Parent Region t

Creates an exact copy of an Amazon EBS snapshot. The location of the source snapshot determines whether you can copy it or not, and the allowed destinations for the snapshot copy. If the source snapshot is in a Region, you can copy it within that Region, to another Region, to an Outpost associated

Creates a crash-consistent, point-in-time copy of an existing Amazon EBS volume within the same Availability Zone. The volume copy can be attached to an Amazon EC2 instance once it reaches the available state. For more information, see Copy an Amazon EBS volume.

Creates a new data export configuration for EC2 Capacity Manager. This allows you to automatically export capacity usage data to an S3 bucket on a scheduled basis. The exported data includes metrics for On-Demand, Spot, and Capacity Reservations usage across your organization.

Creates a new Capacity Reservation with the specified attributes. Capacity Reservations enable you to reserve capacity for your Amazon EC2 instances in a specific Availability Zone for any duration. You can create a Capacity Reservation at any time, and you can choose when it starts. You can create

Create a new Capacity Reservation by splitting the capacity of the source Capacity Reservation. The new Capacity Reservation will have the same attributes as the source Capacity Reservation except for tags. The source Capacity Reservation must be active and owned by your Amazon Web Services account

Creates a Capacity Reservation Fleet. For more information, see Create a Capacity Reservation Fleet in the Amazon EC2 User Guide.

Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the Amazon Web Services Wavelength Developer Guide.

Creates a Client VPN endpoint. A Client VPN endpoint is the resource you create and configure to enable and manage client VPN sessions. It is the destination endpoint at which all client VPN sessions are terminated.

Adds a route to a network to a Client VPN endpoint. Each Client VPN endpoint has a route table that describes the available destination network routes. Each route in the route table specifies the path for traffic to specific resources or networks.

Creates a range of customer-owned IP addresses.

Creates a pool of customer-owned IP (CoIP) addresses.

Provides information to Amazon Web Services about your customer gateway device. The customer gateway device is the appliance at your end of the VPN connection. You must provide the IP address of the customer gateway device’s external interface. The IP address must be static and can be behind a devic

Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Create a default subnet in the Amazon VPC User Guide.

Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPCs in the Amazon VPC User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous

Delegates ownership of the Amazon EBS root volume for an Apple silicon Mac instance to an administrative user.

Creates a custom set of DHCP options. After you create a DHCP option set, you associate it with a VPC. After you associate a DHCP option set with a VPC, all existing and newly launched instances in the VPC use this set of DHCP options. The following are the individual DHCP options you can specify. F

[IPv6 only] Creates an egress-only internet gateway for your VPC. An egress-only internet gateway is used to enable outbound communication over IPv6 from instances in your VPC to the internet, and prevents hosts outside of your VPC from initiating an IPv6 connection with your instance.

Creates an EC2 Fleet that contains the configuration information for On-Demand Instances and Spot Instances. Instances are launched immediately if there is available capacity. A single EC2 Fleet can include multiple launch specifications that vary by instance type, AMI, Availability Zone, or subnet.

Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC. Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, se

Creates an Amazon FPGA Image (AFI) from the specified design checkpoint (DCP). The create operation is asynchronous. To verify that the AFI was successfully created and is ready for use, check the output logs. An AFI contains the FPGA bitstream that is ready to download to an FPGA. You can securely

Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped. If you customized your instance with instance store volumes or Amazon EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. Whe

Creates a report that shows how your image is used across other Amazon Web Services accounts. The report provides visibility into which accounts are using the specified image, and how many resources (EC2 instances or launch templates) are referencing it. For more information, see View your AMI usage

Creates an EC2 Instance Connect Endpoint. An EC2 Instance Connect Endpoint allows you to connect to an instance, without requiring the instance to have a public IPv4 or public IPv6 address. For more information, see Connect to your instances using EC2 Instance Connect Endpoint in the Amazon EC2 User

Creates an event window in which scheduled events for the associated Amazon EC2 instances can run. You can define either a set of time ranges or a cron expression when creating the event window, but not both. All event window times are in UTC. You can create up to 200 event windows per Amazon Web Se

Exports a running or stopped instance to an Amazon S3 bucket. For information about the prerequisites for your Amazon S3 bucket, supported operating systems, image formats, and known limitations for the types of instances you can export, see Exporting an instance as a VM Using VM Import/Export in th

Creates an internet gateway for use with a VPC. After creating the internet gateway, you attach it to a VPC using AttachInternetGateway. For more information, see Internet gateways in the Amazon VPC User Guide.

Creates an interruptible Capacity Reservation by specifying the number of unused instances you want to allocate from your source reservation. This helps you make unused capacity available for other workloads within your account while maintaining control to reclaim it.

Create an IPAM. Amazon VPC IP Address Manager (IPAM) is a VPC feature that you can use to automate your IP address management workflows including assigning, tracking, troubleshooting, and auditing IP addresses across Amazon Web Services Regions and accounts throughout your Amazon Web Services Organi

Create a verification token. A verification token is an Amazon Web Services-generated random value that you can use to prove ownership of an external resource. For example, you can use a verification token to validate that you control a public IP address range when you bring an IP address range to A

Creates an IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single policy can have multiple

Create an IP address pool for Amazon VPC IP Address Manager (IPAM). In IPAM, a pool is a collection of contiguous IP addresses CIDRs. Pools enable you to organize your IP addresses according to your routing and security needs. For example, if you have separate routing and security needs for developm

Creates an IPAM prefix list resolver. An IPAM prefix list resolver is a component that manages the synchronization between IPAM's CIDR selection rules and customer-managed prefix lists. It automates connectivity configurations by selecting CIDRs from IPAM's database based on your business logic and

Creates an IPAM prefix list resolver target. An IPAM prefix list resolver target is an association between a specific customer-managed prefix list and an IPAM prefix list resolver. The target enables the resolver to synchronize CIDRs selected by its rules into the specified prefix list, which can th

Creates an IPAM resource discovery. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Create an IPAM scope. In IPAM, a scope is the highest-level container within IPAM. An IPAM contains two default scopes. Each scope represents the IP space for a single network. The private scope is intended for all private IP address space. The public scope is intended for all public IP address spac

Creates an ED25519 or 2048-bit RSA key pair with the specified name and in the specified format. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#1 private key or an unencrypted PPK formatted priva

Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Store instance launch parameters in Amazo

Creates a new version of a launch template. You must specify an existing launch template, either by name or ID. You can determine whether the new version inherits parameters from a source version, and add or overwrite parameters as needed. Launch template versions are numbered in the order in which

Creates a static route for the specified local gateway route table. You must specify one of the following targets: LocalGatewayVirtualInterfaceGroupId NetworkInterfaceId

Creates a local gateway route table.

Creates a local gateway route table virtual interface group association.

Associates the specified VPC with the specified local gateway route table.

Create a virtual interface for a local gateway.

Create a local gateway virtual interface group.

Creates a System Integrity Protection (SIP) modification task to configure the SIP settings for an x86 Mac instance or Apple silicon Mac instance. For more information, see Configure SIP for Amazon EC2 instances in the Amazon EC2 User Guide. When you configure the SIP settings for your instance, yo

Creates a managed prefix list. You can specify entries for the prefix list. Each entry consists of a CIDR block and an optional description.

Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic fro

Creates a network ACL in a VPC. Network ACLs provide an optional layer of security (in addition to security groups) for the instances in your VPC. For more information, see Network ACLs in the Amazon VPC User Guide.

Creates an entry (a rule) in a network ACL with the specified rule number. Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the ACL, we process the entries in th

Creates a Network Access Scope. Amazon Web Services Network Access Analyzer enables cloud networking and cloud operations teams to verify that their networks on Amazon Web Services conform to their network security and governance objectives. For more information, see the Amazon Web Services Network

Creates a path to analyze for reachability. Reachability Analyzer enables you to analyze and debug network reachability between two resources in your virtual private cloud (VPC). For more information, see the Reachability Analyzer Guide.

Creates a network interface in the specified subnet. The number of IP addresses you can assign to a network interface varies by instance type. For more information about network interfaces, see Elastic network interfaces in the Amazon EC2 User Guide.

Grants an Amazon Web Services-authorized account permission to attach the specified network interface to an instance in their account. You can grant permission to a single Amazon Web Services account only, and only one account at a time.

Creates a placement group in which to launch instances. The strategy of the placement group determines how the instances are organized within the group. A cluster placement group is a logical grouping of instances within a single Availability Zone that benefit from low network latency, high network

Creates a public IPv4 address pool. A public IPv4 pool is an EC2 IP address pool required for the public IPv4 CIDRs that you own and bring to Amazon Web Services to manage with IPAM. IPv6 addresses you bring to Amazon Web Services, however, use IPAM pools only. To monitor the status of pool creation

Replaces the EBS-backed root volume for a running instance with a new volume that is restored to the original root volume's launch state, that is restored to a specific snapshot taken from the original root volume, or that is restored from an AMI that has the same key characteristics as that of the

Creates a listing for Amazon EC2 Standard Reserved Instances to be sold in the Reserved Instance Marketplace. You can submit one Standard Reserved Instance listing at a time. To get a list of your Standard Reserved Instances, you can use the DescribeReservedInstances operation. Only Standard Reserv

Starts a task that restores an AMI from an Amazon S3 object that was previously created by using CreateStoreImageTask. To use this API, you must have the required permissions. For more information, see Permissions for storing and restoring AMIs using S3 in the Amazon EC2 User Guide. For more informa

Creates a route in a route table within a VPC. You must specify either a destination CIDR block or a prefix list ID. You must also specify exactly one of the resources from the parameter list. When determining how to route traffic, we use the route with the most specific match. For example, traffic

Creates a new route server to manage dynamic routing in a VPC. Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and internet gateway route tables with your pr

Creates a new endpoint for a route server in a specified subnet. A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers. For more information see Dynamic routing in yo

Creates a new BGP peer for a specified route server endpoint. A route server peer is a session between a route server endpoint and the device deployed in Amazon Web Services (such as a firewall appliance or other network security function running on an EC2 instance). The device must meet these requi

Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route tables in the Amazon VPC User Guide.

Creates a secondary network. The allowed size for a secondary network CIDR block is between /28 netmask (16 IP addresses) and /12 netmask (1,048,576 IP addresses).

Creates a secondary subnet in a secondary network. A secondary subnet CIDR block must not overlap with the CIDR block of an existing secondary subnet in the secondary network. After you create a secondary subnet, you can't change its CIDR block. The allowed size for a secondary subnet CIDR block is

Creates a security group. A security group acts as a virtual firewall for your instance to control inbound and outbound traffic. For more information, see Amazon EC2 security groups in the Amazon EC2 User Guide and Security groups for your VPC in the Amazon VPC User Guide. When you create a security

Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance. The location of the source EBS volume determines where you can create the snapshot. If the source volume is in a Regi

Creates crash-consistent snapshots of multiple EBS volumes attached to an Amazon EC2 instance. Volumes are chosen by specifying an instance. Each volume attached to the specified instance will produce one snapshot that is crash-consistent across the instance. You can include all of the volumes curre

Creates a data feed for Spot Instances, enabling you to view Spot Instance usage logs. You can create one data feed per Amazon Web Services account. For more information, see Spot Instance data feed in the Amazon EC2 User Guide.

Stores an AMI as a single object in an Amazon S3 bucket. To use this API, you must have the required permissions. For more information, see Permissions for storing and restoring AMIs using S3 in the Amazon EC2 User Guide. For more information, see Store and restore an AMI using S3 in the Amazon EC2

Creates a subnet in the specified VPC. For an IPv4 only subnet, specify an IPv4 CIDR block. If the VPC has an IPv6 CIDR block, you can create an IPv6 only subnet or a dual stack subnet instead. For an IPv6 only subnet, specify an IPv6 CIDR block. For a dual stack subnet, specify both an IPv4 CIDR bl

Creates a subnet CIDR reservation. For more information, see Subnet CIDR reservations in the Amazon VPC User Guide and Manage prefixes for your network interfaces in the Amazon EC2 User Guide.

Adds or overwrites only the specified tags for the specified Amazon EC2 resource or resources. When you specify an existing tag key, the value is overwritten with the new value. Each resource can have a maximum of 50 tags. Each tag consists of a key and optional value. Tag keys must be unique per re

Creates a Traffic Mirror filter. A Traffic Mirror filter is a set of rules that defines the traffic to mirror. By default, no traffic is mirrored. To mirror traffic, use CreateTrafficMirrorFilterRule to add Traffic Mirror rules to the filter. The rules you add define what traffic gets mirrored. You

Creates a Traffic Mirror filter rule. A Traffic Mirror rule defines the Traffic Mirror source traffic to mirror. You need the Traffic Mirror filter ID when you create the rule.

Creates a Traffic Mirror session. A Traffic Mirror session actively copies packets from a Traffic Mirror source to a Traffic Mirror target. Create a filter, and then assign it to the session to define a subset of the traffic to mirror, for example all TCP traffic. The Traffic Mirror source and the T

Creates a target for your Traffic Mirror session. A Traffic Mirror target is the destination for mirrored traffic. The Traffic Mirror source and the Traffic Mirror target (monitoring appliances) can be in the same VPC, or in different VPCs connected via VPC peering or a transit gateway. A Traffic Mi

Creates a transit gateway. You can use a transit gateway to interconnect your virtual private clouds (VPC) and on-premises networks. After the transit gateway enters the available state, you can attach your VPCs and VPN connections to the transit gateway. To attach your VPCs, use CreateTransitGatewa

Creates a Connect attachment from a specified transit gateway attachment. A Connect attachment is a GRE-based tunnel attachment that you can use to establish a connection between a transit gateway and an appliance. A Connect attachment uses an existing VPC or Amazon Web Services Direct Connect attac

Creates a Connect peer for a specified transit gateway Connect attachment between a transit gateway and an appliance. The peer address and transit gateway address must be the same IP address family (IPv4 or IPv6). For more information, see Connect peers in the Amazon Web Services Transit Gateways Gu

Creates a metering policy for a transit gateway to track and measure network traffic.

Creates an entry in a transit gateway metering policy to define traffic measurement rules.

Creates a multicast domain using the specified transit gateway. The transit gateway must be in the available state before you create a domain. Use DescribeTransitGateways to see the state of transit gateway.

Requests a transit gateway peering attachment between the specified transit gateway (requester) and a peer transit gateway (accepter). The peer transit gateway can be in your account or a different Amazon Web Services account. After you create the peering attachment, the owner of the accepter transi

Creates a transit gateway policy table.

Creates a reference (route) to a prefix list in a specified transit gateway route table.

Creates a static route for the specified transit gateway route table.

Creates a route table for the specified transit gateway.

Advertises a new transit gateway route table.

Attaches the specified VPC to the specified transit gateway. If you attach a VPC with a CIDR range that overlaps the CIDR range of a VPC that is already attached, the new VPC CIDR range is not propagated to the default propagation route table. To send VPC traffic to an attached transit gateway, add

An Amazon Web Services Verified Access endpoint is where you define your application along with an optional endpoint-level access policy.

An Amazon Web Services Verified Access group is a collection of Amazon Web Services Verified Access endpoints who's associated applications have similar security requirements. Each instance within a Verified Access group shares an Verified Access policy. For example, you can group all Verified Acces

An Amazon Web Services Verified Access instance is a regional entity that evaluates application requests and grants access only when your security requirements are met.

A trust provider is a third-party entity that creates, maintains, and manages identity information for users and devices. When an application request is made, the identity information sent by the trust provider is evaluated by Verified Access before allowing or denying the application request.

Creates an EBS volume that can be attached to an instance in the same Availability Zone. You can create a new empty volume or restore a volume from an EBS snapshot. Any Amazon Web Services Marketplace product codes from the snapshot are propagated to the volume. You can create encrypted volumes. Enc

Creates a VPC with the specified CIDR blocks. A VPC must have an associated IPv4 CIDR block. You can choose an IPv4 CIDR block or an IPAM-allocated IPv4 CIDR block. You can optionally associate an IPv6 CIDR block with a VPC. You can choose an IPv6 CIDR block, an Amazon-provided IPv6 CIDR block, an I

Create a VPC Block Public Access (BPA) exclusion. A VPC BPA exclusion is a mode that can be applied to a single VPC or subnet that exempts it from the account’s BPA mode and will allow bidirectional or egress-only access. You can create BPA exclusions for VPCs and subnets even when BPA is not enable

Creates a VPC Encryption Control configuration for a specified VPC. VPC Encryption Control enables you to enforce encryption for all data in transit within and between VPCs to meet compliance requirements for standards like HIPAA, FedRAMP, and PCI DSS. For more information, see Enforce VPC encryptio

Creates a VPC endpoint. A VPC endpoint provides a private connection between the specified VPC and the specified endpoint service. You can use an endpoint service provided by Amazon Web Services, an Amazon Web Services Marketplace Partner, or another Amazon Web Services account. For more information

Creates a connection notification for a specified VPC endpoint or VPC endpoint service. A connection notification notifies you of specific endpoint events. You must create an SNS topic to receive notifications. For more information, see Creating an Amazon SNS topic in the Amazon SNS Developer Guide.

Creates a VPC endpoint service to which service consumers (Amazon Web Services accounts, users, and IAM roles) can connect. Before you create an endpoint service, you must create one of the following for your service: A Network Load Balancer. Service consumers connect to your service using an inte

Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another Amazon Web Services account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC canno

Creates a VPN concentrator that aggregates multiple VPN connections to a transit gateway.

Creates a VPN connection between an existing virtual private gateway or transit gateway and a customer gateway. The supported connection type is ipsec.1. The response includes information that you need to give to your network administrator to configure your customer gateway. We strongly recommend t

Creates a static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway. For more information, see Amazon Web Services Site-to-Site VPN in

Creates a virtual private gateway. A virtual private gateway is the endpoint on the VPC side of your VPN connection. You can create a virtual private gateway before creating the VPC itself. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN Use

Deletes an existing Capacity Manager data export configuration. This stops future scheduled exports but does not delete previously exported files from S3.

Deletes a carrier gateway. If you do not delete the route that contains the carrier gateway as the Target, the route is a blackhole route. For information about how to delete a route, see DeleteRoute.

Deletes the specified Client VPN endpoint. You must disassociate all target networks before you can delete a Client VPN endpoint.

Deletes a route from a Client VPN endpoint. You can only delete routes that you manually added using the CreateClientVpnRoute action. You cannot delete routes that were automatically added when associating a subnet. To remove routes that have been automatically added, disassociate the target subnet

Deletes a range of customer-owned IP addresses.

Deletes a pool of customer-owned IP (CoIP) addresses.

Deletes the specified customer gateway. You must delete the VPN connection before you can delete the customer gateway.

Deletes the specified set of DHCP options. You must disassociate the set of DHCP options before you can delete it. You can disassociate the set of DHCP options by associating either a new set of options or the default set of options with the VPC.

Deletes an egress-only internet gateway.

Deletes the specified EC2 Fleet request. After you delete an EC2 Fleet request, it launches no new instances. You must also specify whether a deleted EC2 Fleet request should terminate its instances. If you choose to terminate the instances, the EC2 Fleet request enters the deleted_terminating state

Deletes one or more flow logs.

Deletes the specified Amazon FPGA Image (AFI).

Deletes the specified image usage report. For more information, see View your AMI usage in the Amazon EC2 User Guide.

Deletes the specified EC2 Instance Connect Endpoint.

Deletes the specified event window. For more information, see Define event windows for scheduled events in the Amazon EC2 User Guide.

Deletes the specified internet gateway. You must detach the internet gateway from the VPC before you can delete it.

Delete an IPAM. Deleting an IPAM removes all monitored data associated with the IPAM including the historical data for CIDRs. For more information, see Delete an IPAM in the Amazon VPC IPAM User Guide.

Delete a verification token. A verification token is an Amazon Web Services-generated random value that you can use to prove ownership of an external resource. For example, you can use a verification token to validate that you control a public IP address range when you bring an IP address range to A

Deletes an IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single policy can have multiple

Delete an IPAM pool. You cannot delete an IPAM pool if there are allocations in it or CIDRs provisioned to it. To release allocations, see ReleaseIpamPoolAllocation. To deprovision pool CIDRs, see DeprovisionIpamPoolCidr. For more information, see Delete a pool in the Amazon VPC IPAM User Guide.

Deletes an IPAM prefix list resolver. Before deleting a resolver, you must first delete all resolver targets associated with it.

Deletes an IPAM prefix list resolver target. This removes the association between the resolver and the managed prefix list, stopping automatic CIDR synchronization. For more information about IPAM prefix list resolver, see Automate prefix list updates with IPAM in the Amazon VPC IPAM User Guide.

Deletes an IPAM resource discovery. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Delete the scope for an IPAM. You cannot delete the default scopes. For more information, see Delete a scope in the Amazon VPC IPAM User Guide.

Deletes the specified key pair, by removing the public key from Amazon EC2.

Deletes a launch template. Deleting a launch template deletes all of its versions.

Deletes one or more versions of a launch template. You can't delete the default version of a launch template; you must first assign a different version as the default. If the default version is the only version for the launch template, you must delete the entire launch template using DeleteLaunchTem

Deletes the specified route from the specified local gateway route table.

Deletes a local gateway route table.

Deletes a local gateway route table virtual interface group association.

Deletes the specified association between a VPC and local gateway route table.

Deletes the specified local gateway virtual interface.

Delete the specified local gateway interface group.

Deletes the specified managed prefix list. You must first remove all references to the prefix list in your resources.

Deletes the specified NAT gateway. Deleting a public NAT gateway disassociates its Elastic IP address, but does not release the address from your account. Deleting a NAT gateway does not delete any NAT gateway routes in your route tables.

Deletes the specified network ACL. You can't delete the ACL if it's associated with any subnets. You can't delete the default network ACL.

Deletes the specified ingress or egress entry (rule) from the specified network ACL.

Deletes the specified Network Access Scope.

Deletes the specified Network Access Scope analysis.

Deletes the specified network insights analysis.

Deletes the specified path.

Deletes the specified network interface. You must detach the network interface before you can delete it.

Deletes a permission for a network interface. By default, you cannot delete the permission if the account for which you're removing the permission has attached the network interface to an instance. However, you can force delete the permission, regardless of any attachment.

Deletes the specified placement group. You must terminate all instances in the placement group before you can delete the placement group. For more information, see Placement groups in the Amazon EC2 User Guide.

Delete a public IPv4 pool. A public IPv4 pool is an EC2 IP address pool required for the public IPv4 CIDRs that you own and bring to Amazon Web Services to manage with IPAM. IPv6 addresses you bring to Amazon Web Services, however, use IPAM pools only.

Deletes the queued purchases for the specified Reserved Instances.

Deletes the specified route from the specified route table.

Deletes the specified route server. Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes

Deletes the specified route server endpoint. A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers.

Deletes the specified BGP peer from a route server. A route server peer is a session between a route server endpoint and the device deployed in Amazon Web Services (such as a firewall appliance or other network security function running on an EC2 instance). The device must meet these requirements:

Deletes the specified route table. You must disassociate the route table from any subnets before you can delete it. You can't delete the main route table.

Deletes a secondary network. You must delete all secondary subnets in the secondary network before you can delete the secondary network.

Deletes a secondary subnet. A secondary subnet must not contain any secondary interfaces prior to deletion.

Deletes a security group. If you attempt to delete a security group that is associated with an instance or network interface, is referenced by another security group in the same VPC, or has a VPC association, the operation fails with DependencyViolation.

Deletes the specified snapshot. When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is remo

Deletes the data feed for Spot Instances.

Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.

Deletes a subnet CIDR reservation.

Deletes the specified set of tags from the specified set of resources. To list the current tags, use DescribeTags. For more information about tags, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.

Deletes the specified Traffic Mirror filter. You cannot delete a Traffic Mirror filter that is in use by a Traffic Mirror session.

Deletes the specified Traffic Mirror rule.

Deletes the specified Traffic Mirror session.

Deletes the specified Traffic Mirror target. You cannot delete a Traffic Mirror target that is in use by a Traffic Mirror session.

Deletes the specified transit gateway.

Deletes the specified Connect attachment. You must first delete any Connect peers for the attachment.

Deletes the specified Connect peer.

Deletes a transit gateway metering policy.

Deletes an entry from a transit gateway metering policy.

Deletes the specified transit gateway multicast domain.

Deletes a transit gateway peering attachment.

Deletes the specified transit gateway policy table.

Deletes a reference (route) to a prefix list in a specified transit gateway route table.

Deletes the specified route from the specified transit gateway route table.

Deletes the specified transit gateway route table. If there are any route tables associated with the transit gateway route table, you must first run DisassociateRouteTable before you can delete the transit gateway route table. This removes any route tables associated with the transit gateway route t

Advertises to the transit gateway that a transit gateway route table is deleted.

Deletes the specified VPC attachment.

Delete an Amazon Web Services Verified Access endpoint.

Delete an Amazon Web Services Verified Access group.

Delete an Amazon Web Services Verified Access instance.

Delete an Amazon Web Services Verified Access trust provider.

Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance). The volume can remain in the deleting state for several minutes. For more information, see Delete an Amazon EBS volume in the Amazon EBS User Guide.

Deletes the specified VPC. You must detach or delete all gateways and resources that are associated with the VPC before you can delete it. For example, you must terminate all instances running in the VPC, delete all security groups associated with the VPC (except the default one), delete all route t

Delete a VPC Block Public Access (BPA) exclusion. A VPC BPA exclusion is a mode that can be applied to a single VPC or subnet that exempts it from the account’s BPA mode and will allow bidirectional or egress-only access. You can create BPA exclusions for VPCs and subnets even when BPA is not enable

Deletes a VPC Encryption Control configuration. This removes the encryption policy enforcement from the specified VPC. For more information, see Enforce VPC encryption in transit in the Amazon VPC User Guide.

Deletes the specified VPC endpoint connection notifications.

Deletes the specified VPC endpoint service configurations. Before you can delete an endpoint service configuration, you must reject any Available or PendingAcceptance interface endpoint connections that are attached to the service.

Deletes the specified VPC endpoints. When you delete a gateway endpoint, we delete the endpoint routes in the route tables for the endpoint. When you delete a Gateway Load Balancer endpoint, we delete its endpoint network interfaces. You can only delete Gateway Load Balancer endpoints when the route

Deletes a VPC peering connection. Either the owner of the requester VPC or the owner of the accepter VPC can delete the VPC peering connection if it's in the active state. The owner of the requester VPC can delete a VPC peering connection in the pending-acceptance state. You cannot delete a VPC peer

Deletes the specified VPN concentrator.

Deletes the specified VPN connection. If you're deleting the VPC and its associated components, we recommend that you detach the virtual private gateway from the VPC and delete the VPC before deleting the VPN connection. If you believe that the tunnel credentials for your VPN connection have been co

Deletes the specified static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway.

Deletes the specified virtual private gateway. You must first detach the virtual private gateway from the VPC. Note that you don't need to delete the virtual private gateway if you plan to delete and recreate the VPN connection between your VPC and your network.

Releases the specified address range that you provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and deletes the corresponding address pool. Before you can release an address range, you must stop advertising it and you must not have any IP address

Deprovisions your Autonomous System Number (ASN) from your Amazon Web Services account. This action can only be called after any BYOIP CIDR associations are removed from your Amazon Web Services account with DisassociateIpamByoasn. For more information, see Tutorial: Bring your ASN to IPAM in the Am

Deprovision a CIDR provisioned from an IPAM pool. If you deprovision a CIDR from a pool that has a source pool, the CIDR is recycled back into the source pool. For more information, see Deprovision pool CIDRs in the Amazon VPC IPAM User Guide.

Deprovision a CIDR from a public IPv4 pool.

Deregisters the specified AMI. A deregistered AMI can't be used to launch new instances. If a deregistered EBS-backed AMI matches a Recycle Bin retention rule, it moves to the Recycle Bin for the specified retention period. It can be restored before its retention period expires, after which it is pe

Deregisters tag keys to prevent tags that have the specified tag keys from being included in scheduled event notifications for resources in the Region.

Deregisters the specified members (network interfaces) from the transit gateway multicast group.

Deregisters the specified sources (network interfaces) from the transit gateway multicast group.

Describes attributes of your Amazon Web Services account. The following are the supported account attributes: default-vpc: The ID of the default VPC for your account, or none. max-instances: This attribute is no longer supported. The returned value does not reflect your actual vCPU limit for r

Describes an Elastic IP address transfer. For more information, see Transfer Elastic IP addresses in the Amazon VPC User Guide. When you transfer an Elastic IP address, there is a two-step handshake between the source and transfer Amazon Web Services accounts. When the source account starts the tran

Describes the specified Elastic IP addresses or all of your Elastic IP addresses.

Describes the attributes of the specified Elastic IP addresses. For requirements, see Using reverse DNS for email applications.

Describes the longer ID format settings for all resource types in a specific Region. This request is useful for performing a quick audit to determine whether a specific Region is fully opted in for longer IDs (17-character IDs). This request only returns information about resource types that support

Describes the Availability Zones, Local Zones, and Wavelength Zones that are available to you. For more information about Availability Zones, Local Zones, and Wavelength Zones, see Regions and zones in the Amazon EC2 User Guide. The order of the elements in the response, including those within nest

Describes the current Infrastructure Performance metric subscriptions.

Describes the specified bundle tasks or all of your bundle tasks. Completed bundle tasks are listed for only a limited time. If your bundle task is no longer in the list, you can still register an AMI from it. Just use RegisterImage with the Amazon S3 bucket name and image manifest name you provide

Describes the IP address ranges that were provisioned for use with Amazon Web Services resources through through bring your own IP addresses (BYOIP).

Describes the events for the specified Capacity Block extension during the specified time.

Describes Capacity Block extension offerings available for purchase in the Amazon Web Services Region that you're currently using.

Describes Capacity Block offerings available for purchase in the Amazon Web Services Region that you're currently using. With Capacity Blocks, you can purchase a specific GPU instance type or EC2 UltraServer for a period of time. To search for an available Capacity Block offering, you specify a rese

Describes the availability of capacity for the specified Capacity blocks, or all of your Capacity Blocks.

Describes details about Capacity Blocks in the Amazon Web Services Region that you're currently using.

Describes one or more Capacity Manager data export configurations. Returns information about export settings, delivery status, and recent export activity.

Describes a request to assign the billing of the unused capacity of a Capacity Reservation. For more information, see Billing assignment for shared Amazon EC2 Capacity Reservations.

Describes one or more Capacity Reservation Fleets.

Describes a tree-based hierarchy that represents the physical host placement of your pending or active Capacity Reservations within an Availability Zone or Local Zone. You can use this information to determine the relative proximity of your capacity within the Amazon Web Services network before it i

Describes one or more of your Capacity Reservations. The results describe only the Capacity Reservations in the Amazon Web Services Region that you're currently using.

Describes one or more of your carrier gateways.

This action is deprecated. Describes your linked EC2-Classic instances. This request only returns information about EC2-Classic instances linked to a VPC through ClassicLink. You cannot use this request to return information about other instances.

Describes the authorization rules for a specified Client VPN endpoint.

Describes active client connections and connections that have been terminated within the last 60 minutes for the specified Client VPN endpoint.

Describes one or more Client VPN endpoints in the account.

Describes the routes for the specified Client VPN endpoint.

Describes the target networks associated with the specified Client VPN endpoint.

Describes the specified customer-owned address pools or all of your customer-owned address pools.

Describes the specified conversion tasks or all your conversion tasks. For more information, see the VM Import/Export User Guide. For information about the import manifest referenced by this API action, see VM Import Manifest.

Describes one or more of your VPN customer gateways. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

Describes the metadata of an account status report, including the status of the report. To view the full report, download it from the Amazon S3 bucket where it was saved. Reports are accessible only when they have the complete status. Reports with other statuses (running, cancelled, or error) are no

Describes your DHCP option sets. The default is to describe all your DHCP option sets. Alternatively, you can specify specific DHCP option set IDs or filter the results to include only the DHCP option sets that match specific criteria. For more information, see DHCP option sets in the Amazon VPC Use

Describes your egress-only internet gateways. The default is to describe all your egress-only internet gateways. Alternatively, you can specify specific egress-only internet gateway IDs or filter the results to include only the egress-only internet gateways that match specific criteria.

Amazon Elastic Graphics reached end of life on January 8, 2024. Describes the Elastic Graphics accelerator associated with your instances.

Describes the specified export image tasks or all of your export image tasks.

Describes the specified export instance tasks or all of your export instance tasks.

Describe details for Windows AMIs that are configured for Windows fast launch.

Describes the state of fast snapshot restores for your snapshots.

Describes the events for the specified EC2 Fleet during the specified time. EC2 Fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query by the last evaluated time and not miss a recorded event. EC2 Fleet events are available for 48 hours. For more i

Describes the running instances for the specified EC2 Fleet. Currently, DescribeFleetInstances does not support fleets of type instant. Instead, use DescribeFleets, specifying the instant fleet ID in the request. For more information, see Describe your EC2 Fleet in the Amazon EC2 User Guide.

Describes the specified EC2 Fleet or all of your EC2 Fleets. If a fleet is of type instant, you must specify the fleet ID in the request, otherwise the fleet does not appear in the response. For more information, see Describe your EC2 Fleet in the Amazon EC2 User Guide.

Describes one or more flow logs. To view the published flow log records, you must view the log destination. For example, the CloudWatch Logs log group, the Amazon S3 bucket, or the Kinesis Data Firehose delivery stream.

Describes the specified attribute of the specified Amazon FPGA Image (AFI).

Describes the Amazon FPGA Images (AFIs) available to you. These include public AFIs, private AFIs that you own, and AFIs owned by other Amazon Web Services accounts for which you have load permissions.

Describes the Dedicated Host reservations that are available to purchase. The results describe all of the Dedicated Host reservation offerings, including offerings that might not match the instance family and Region of your Dedicated Hosts. When purchasing an offering, ensure that the instance famil

Describes reservations that are associated with Dedicated Hosts in your account.

Describes the specified Dedicated Hosts or all your Dedicated Hosts. The results describe only the Dedicated Hosts in the Region you're currently using. All listed instances consume capacity on your Dedicated Host. Dedicated Hosts that have recently been released are listed with the state released.

Describes your IAM instance profile associations.

Describes the ID format settings for your resources on a per-Region basis, for example, to view which resource types are enabled for longer IDs. This request only returns information about resource types whose ID formats can be modified; it does not return information about other resource types. The

Describes the ID format settings for resources for the specified IAM user, IAM role, or root user. For example, you can view the resource types that are enabled for longer IDs. This request only returns information about resource types whose ID formats can be modified; it does not return information

Describes the specified attribute of the specified AMI. You can specify only one attribute at a time. The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order.

Describes your Amazon Web Services resources that are referencing the specified images. For more information, see Identify your resources referencing specified AMIs in the Amazon EC2 User Guide.

Describes the entries in image usage reports, showing how your images are used across other Amazon Web Services accounts. For more information, see View your AMI usage in the Amazon EC2 User Guide.

Describes the configuration and status of image usage reports, filtered by report IDs or image IDs. For more information, see View your AMI usage in the Amazon EC2 User Guide.

Describes the specified images (AMIs, AKIs, and ARIs) available to you or all of the images available to you. The images available to you include public images, private images that you own, and private images owned by other Amazon Web Services accounts for which you have explicit launch permissions.

Displays details about an import virtual machine or import snapshot tasks that are already created.

Describes your import snapshot tasks.

Describes the specified attribute of the specified instance. You can specify only one attribute at a time. Available attributes include SQL license exemption configuration for instances registered with the SQL LE service.

Describes the specified EC2 Instance Connect Endpoints or all EC2 Instance Connect Endpoints.

Describes the credit option for CPU usage of the specified burstable performance instances. The credit options are standard and unlimited. If you do not specify an instance ID, Amazon EC2 returns burstable performance instances with the unlimited credit option, as well as instances that were previou

Describes the tag keys that are registered to appear in scheduled event notifications for resources in the current Region.

Describes the specified event windows or all event windows. If you specify event window IDs, the output includes information for only the specified event windows. If you specify filters, the output includes information for only those event windows that meet the filter criteria. If you do not specify

Describes the AMI that was used to launch an instance, even if the AMI is deprecated, deregistered, made private (no longer public or shared with your account), or not allowed. If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the

Describes the historical SQL Server High Availability states for Amazon EC2 instances that are enabled for Amazon EC2 High Availability for SQL Server monitoring.

Describes the SQL Server High Availability states for Amazon EC2 instances that are enabled for Amazon EC2 High Availability for SQL Server monitoring.

Describes the status of the specified instances or all of your instances. By default, only running instances are described, unless you specifically indicate to return the status of all instances. Instance status includes the following components: Status checks - Amazon EC2 performs status checks

Describes a tree-based hierarchy that represents the physical host placement of your EC2 instances within an Availability Zone or Local Zone. You can use this information to determine the relative proximity of your EC2 instances within the Amazon Web Services network to support your tightly coupled

Lists the instance types that are offered for the specified location. If no location is specified, the default is to list the instance types that are offered in the current Region.

Describes the specified instance types. By default, all instance types for the current Region are described. Alternatively, you can filter the results.

Describes the specified instances or all instances. If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the output includes information for only those instances that meet the filter criteria. If you do not specify instance IDs or fil

Describes your internet gateways. The default is to describe all your internet gateways. Alternatively, you can specify specific internet gateway IDs or filter the results to include only the internet gateways that match specific criteria.

Describes your Autonomous System Numbers (ASNs), their provisioning statuses, and the BYOIP CIDRs with which they are associated. For more information, see Tutorial: Bring your ASN to IPAM in the Amazon VPC IPAM guide.

Describe verification tokens. A verification token is an Amazon Web Services-generated random value that you can use to prove ownership of an external resource. For example, you can use a verification token to validate that you control a public IP address range when you bring an IP address range to

Describes one or more IPAM policies. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single policy can h

Get information about your IPAM pools.

Describes one or more IPAM prefix list resolver Targets. Use this operation to view the configuration and status of resolver targets.

Describes one or more IPAM prefix list resolvers. Use this operation to view the configuration, status, and properties of your resolvers.

Describes IPAM resource discoveries. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Describes resource discovery association with an Amazon VPC IPAM. An associated resource discovery is a resource discovery that has been associated with an IPAM..

Get information about your IPAM scopes.

Get information about your IPAM pools. For more information, see What is IPAM? in the Amazon VPC IPAM User Guide.

Describes your IPv6 address pools.

Describes the specified key pairs or all of your key pairs. For more information about key pairs, see Amazon EC2 key pairs in the Amazon EC2 User Guide.

Describes one or more versions of a specified launch template. You can describe all versions, individual versions, or a range of versions. You can also describe all the latest versions or all the default versions of all the launch templates in your account.

Describes one or more launch templates.

Describes the associations between virtual interface groups and local gateway route tables.

Describes the specified associations between VPCs and local gateway route tables.

Describes one or more local gateway route tables. By default, all local gateway route tables are described. Alternatively, you can filter the results.

Describes the specified local gateway virtual interface groups.

Describes the specified local gateway virtual interfaces.

Describes one or more local gateways. By default, all local gateways are described. Alternatively, you can filter the results.

Describes the lock status for a snapshot.

Describes the specified EC2 Mac Dedicated Host or all of your EC2 Mac Dedicated Hosts.

Describes a System Integrity Protection (SIP) modification task or volume ownership delegation task for an Amazon EC2 Mac instance. For more information, see Configure SIP for Amazon EC2 instances in the Amazon EC2 User Guide.

Describes your managed prefix lists and any Amazon Web Services-managed prefix lists.

This action is deprecated. Describes your Elastic IP addresses that are being moved from or being restored to the EC2-Classic platform. This request does not return information about any other Elastic IP addresses in your account.

Describes your NAT gateways. The default is to describe all your NAT gateways. Alternatively, you can specify specific NAT gateway IDs or filter the results to include only the NAT gateways that match specific criteria.

Describes your network ACLs. The default is to describe all your network ACLs. Alternatively, you can specify specific network ACL IDs or filter the results to include only the network ACLs that match specific criteria. For more information, see Network ACLs in the Amazon VPC User Guide.

Describes the specified Network Access Scope analyses.

Describes the specified Network Access Scopes.

Describes one or more of your network insights analyses.

Describes one or more of your paths.

Describes a network interface attribute. You can specify only one attribute at a time.

Describes the permissions for your network interfaces.

Describes the specified network interfaces or all your network interfaces. If you have a large number of network interfaces, the operation fails unless you use pagination or one of the following filters: group-id, mac-address, private-dns-name, private-ip-address, subnet-id, or vpc-id. We strongly

Describes the Outposts link aggregation groups (LAGs). LAGs are only available for second-generation Outposts racks at this time.

Describes the specified placement groups or all of your placement groups. To describe a specific placement group that is shared with your account, you must specify the ID of the placement group using the GroupId parameter. Specifying the name of a shared placement group using the GroupNames paramet

Describes available Amazon Web Services services in a prefix list format, which includes the prefix list name and prefix list ID of the service and the IP address range for the service.

Describes the ID format settings for the root user and all IAM roles and IAM users that have explicitly specified a longer ID (17-character ID) preference. By default, all IAM roles and IAM users default to the same ID settings as the root user, unless they explicitly override the settings. This re

Describes the specified IPv4 address pools.

Describes the Regions that are enabled for your account, or all Regions. For a list of the Regions supported by Amazon EC2, see Amazon EC2 service endpoints. For information about enabling and disabling Regions for your account, see Specify which Amazon Web Services Regions your account can use in t

Describes a root volume replacement task. For more information, see Replace a root volume in the Amazon EC2 User Guide.

Describes one or more of the Reserved Instances that you purchased. For more information about Reserved Instances, see Reserved Instances in the Amazon EC2 User Guide. The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the

Describes your account's Reserved Instance listings in the Reserved Instance Marketplace. The Reserved Instance Marketplace matches sellers who want to resell Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold

Describes the modifications made to your Reserved Instances. If no parameter is specified, information about all your Reserved Instances modification requests is returned. If a modification ID is specified, only information about the specific modification is returned. For more information, see Modif

Describes Reserved Instance offerings that are available for purchase. With Reserved Instances, you purchase the right to launch instances for a period of time. During that time period, you do not receive insufficient capacity errors, and you pay a lower usage rate than the rate charged for On-Deman

Describes one or more route server endpoints. A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers. For more information see Dynamic routing in your VPC with VPC Rou

Describes one or more route server peers. A route server peer is a session between a route server endpoint and the device deployed in Amazon Web Services (such as a firewall appliance or other network security function running on an EC2 instance). The device must meet these requirements: Have an e

Describes one or more route servers. Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 route

Describes your route tables. The default is to describe all your route tables. Alternatively, you can specify specific route table IDs or filter the results to include only the route tables that match specific criteria. Each subnet in your VPC must be associated with a route table. If a subnet is no

Finds available schedules that meet the specified criteria. You can search for an available schedule no more than 3 months in advance. You must meet the minimum required duration of 1,200 hours per year. For example, the minimum daily schedule is 4 hours, the minimum weekly schedule is 24 hours, and

Describes the specified Scheduled Instances or all your Scheduled Instances.

Describes one or more of your secondary interfaces.

Describes one or more secondary networks.

Describes one or more of your secondary subnets.

Describes the VPCs on the other side of a VPC peering or Transit Gateway connection that are referencing the security groups you've specified in this request.

Describes one or more of your security group rules.

Describes security group VPC associations made with AssociateSecurityGroupVpc.

Describes the specified security groups or all of your security groups.

Describes the Outpost service link virtual interfaces.

Describes the specified attribute of the specified snapshot. You can specify only one attribute at a time. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon EBS User Guide.

Describes the storage tier status of one or more Amazon EBS snapshots.

Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other Amazon Web Services accounts for which you have explicit create volume pe

Describes the data feed for Spot Instances. For more information, see Spot Instance data feed in the Amazon EC2 User Guide.

Describes the running instances for the specified Spot Fleet.

Describes the events for the specified Spot Fleet request during the specified time. Spot Fleet events are delayed by up to 30 seconds before they can be described. This ensures that you can query by the last evaluated time and not miss a recorded event. Spot Fleet events are available for 48 hours.

Describes your Spot Fleet requests. Spot Fleet requests are deleted 48 hours after they are canceled and their instances are terminated.

Describes the specified Spot Instance requests. You can use DescribeSpotInstanceRequests to find a running Spot Instance by examining the response. If the status of the Spot Instance is fulfilled, the instance ID appears in the response and contains the identifier of the instance. Alternatively, you

Describes the Spot price history. For more information, see Spot Instance pricing history in the Amazon EC2 User Guide. When you specify a start and end time, the operation returns the prices of the instance types within that time range. It also returns the last price change before the start time, w

Describes the stale security group rules for security groups referenced across a VPC peering connection, transit gateway connection, or with a security group VPC association. Rules are stale when they reference a deleted security group. Rules can also be stale if they reference a security group in a

Describes the progress of the AMI store tasks. You can describe the store tasks for specified AMIs. If you don't specify the AMIs, you get a paginated list of store tasks from the last 31 days. For each AMI task, the response indicates if the task is InProgress, Completed, or Failed. For tasks InPro

Describes your subnets. The default is to describe all your subnets. Alternatively, you can specify specific subnet IDs or filter the results to include only the subnets that match specific criteria. For more information, see Subnets in the Amazon VPC User Guide.

Describes the specified tags for your EC2 resources. For more information about tags, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts. The order o

Describe traffic mirror filters that determine the traffic that is mirrored.

Describes one or more Traffic Mirror filters.

Describes one or more Traffic Mirror sessions. By default, all Traffic Mirror sessions are described. Alternatively, you can filter the results.

Information about one or more Traffic Mirror targets.

Describes one or more attachments between resources and transit gateways. By default, all attachments are described. Alternatively, you can filter the results by attachment ID, attachment state, resource ID, or resource owner.

Describes one or more Connect peers.

Describes one or more Connect attachments.

Describes one or more transit gateway metering policies.

Describes one or more transit gateway multicast domains.

Describes your transit gateway peering attachments.

Describes one or more transit gateway route policy tables.

Describes one or more transit gateway route table advertisements.

Describes one or more transit gateway route tables. By default, all transit gateway route tables are described. Alternatively, you can filter the results.

Describes one or more VPC attachments. By default, all VPC attachments are described. Alternatively, you can filter the results.

Describes one or more transit gateways. By default, all transit gateways are described. Alternatively, you can filter the results.

Describes one or more network interface trunk associations.

Describes the specified Amazon Web Services Verified Access endpoints.

Describes the specified Verified Access groups.

Describes the specified Amazon Web Services Verified Access instances.

Describes the specified Amazon Web Services Verified Access instances.

Describes the specified Amazon Web Services Verified Access trust providers.

Describes the specified attribute of the specified volume. You can specify only one attribute at a time. For more information about EBS volumes, see Amazon EBS volumes in the Amazon EBS User Guide.

Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume'

Describes the specified EBS volumes or all of your EBS volumes. If you are describing a long list of volumes, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. For more information about EBS volumes, see Amazon EBS volumes in the Amazon

Describes the most recent volume modification request for the specified EBS volumes. For more information, see Monitor the progress of volume modifications in the Amazon EBS User Guide.

Describes the specified attribute of the specified VPC. You can specify only one attribute at a time.

Describe VPC Block Public Access (BPA) exclusions. A VPC BPA exclusion is a mode that can be applied to a single VPC or subnet that exempts it from the account’s BPA mode and will allow bidirectional or egress-only access. You can create BPA exclusions for VPCs and subnets even when BPA is not enabl

Describe VPC Block Public Access (BPA) options. VPC Block Public Access (BPA) enables you to block resources in VPCs and subnets that you own in a Region from reaching or being reached from the internet through internet gateways and egress-only internet gateways. To learn more about VPC BPA, see Blo

This action is deprecated. Describes the ClassicLink status of the specified VPCs.

This action is deprecated. Describes the ClassicLink DNS support status of one or more VPCs. If enabled, the DNS hostname of a linked EC2-Classic instance resolves to its private IP address when addressed from an instance in the VPC to which it's linked. Similarly, the DNS hostname of an instance

Describes one or more VPC Encryption Control configurations. VPC Encryption Control enables you to enforce encryption for all data in transit within and between VPCs to meet compliance requirements You can filter the results to return information about specific encryption controls or VPCs. For more

Describes the VPC resources, VPC endpoint services, Amazon Lattice services, or service networks associated with the VPC endpoint.

Describes the connection notifications for VPC endpoints and VPC endpoint services.

Describes the VPC endpoint connections to your VPC endpoint services, including any endpoints that are pending your acceptance.

Describes the VPC endpoint service configurations in your account (your services).

Describes the principals (service consumers) that are permitted to discover your VPC endpoint service. Principal ARNs with path components aren't supported.

Describes available services to which you can create a VPC endpoint. When the service provider and the consumer have different accounts in multiple Availability Zones, and the consumer views the VPC endpoint service information, the response only includes the common Availability Zones. For example,

Describes your VPC endpoints. The default is to describe all your VPC endpoints. Alternatively, you can specify specific VPC endpoint IDs or filter the results to include only the VPC endpoints that match specific criteria.

Describes your VPC peering connections. The default is to describe all your VPC peering connections. Alternatively, you can specify specific VPC peering connection IDs or filter the results to include only the VPC peering connections that match specific criteria.

Describes your VPCs. The default is to describe all your VPCs. Alternatively, you can specify specific VPC IDs or filter the results to include only the VPCs that match specific criteria.

Describes one or more of your VPN concentrators.

Describes one or more of your VPN connections. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

Describes one or more of your virtual private gateways. For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

This action is deprecated. Unlinks (detaches) a linked EC2-Classic instance from a VPC. After the instance has been unlinked, the VPC security groups are no longer associated with it. An instance is automatically unlinked from a VPC when it's stopped.

Detaches an internet gateway from a VPC, disabling connectivity between the internet and the VPC. The VPC must not contain any running instances with Elastic IP addresses or public IPv4 addresses.

Detaches a network interface from an instance.

Detaches the specified Amazon Web Services Verified Access trust provider from the specified Amazon Web Services Verified Access instance.

Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely u

Detaches a virtual private gateway from a VPC. You do this if you're planning to turn off the VPC and not use it anymore. You can confirm a virtual private gateway has been completely detached from a VPC by describing the virtual private gateway (any attachments to the virtual private gateway are al

Disables Elastic IP address transfer. For more information, see Transfer Elastic IP addresses in the Amazon VPC User Guide.

Disables Allowed AMIs for your account in the specified Amazon Web Services Region. When set to disabled, the image criteria in your Allowed AMIs settings do not apply, and no restrictions are placed on AMI discoverability or usage. Users in your account can launch instances using any public AMI or

Disables Infrastructure Performance metric subscriptions.

Disables EC2 Capacity Manager for your account. This stops data ingestion and removes access to capacity analytics and optimization recommendations. Previously collected data is retained but no new data will be processed.

Disables EBS encryption by default for your account in the current Region. After you disable encryption by default, you can still create encrypted volumes by enabling encryption when you create each volume. Disabling encryption by default does not change the encryption status of your existing volume

Discontinue Windows fast launch for a Windows AMI, and clean up existing pre-provisioned snapshots. After you disable Windows fast launch, the AMI uses the standard launch process for each new instance. Amazon EC2 must remove all pre-provisioned snapshots before you can enable Windows fast launch ag

Disables fast snapshot restores for the specified snapshots in the specified Availability Zones.

Sets the AMI state to disabled and removes all launch permissions from the AMI. A disabled AMI can't be used for instance launches. A disabled AMI can't be shared. If an AMI was public or previously shared, it is made private. If an AMI was shared with an Amazon Web Services account, organization, o

Disables block public access for AMIs at the account level in the specified Amazon Web Services Region. This removes the block public access restriction from your account. With the restriction removed, you can publicly share your AMIs in the specified Amazon Web Services Region. For more information

Cancels the deprecation of the specified AMI. For more information, see Deprecate an Amazon EC2 AMI in the Amazon EC2 User Guide.

Disables deregistration protection for an AMI. When deregistration protection is disabled, the AMI can be deregistered. If you chose to include a 24-hour cooldown period when you enabled deregistration protection for the AMI, then, when you disable deregistration protection, you won’t immediately be

Disable Amazon EC2 instances running in an SQL Server High Availability cluster from SQL Server High Availability instance standby detection monitoring. Once disabled, Amazon Web Services no longer monitors the metadata for the instances to determine whether they are active or standby nodes in the S

Disable the IPAM account. For more information, see Enable integration with Organizations in the Amazon VPC IPAM User Guide.

Disables an IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single policy can have multiple

Disables route propagation from a route server to a specified route table. When enabled, route server propagation installs the routes in the FIB on the route table you've specified. Route server supports IPv4 and IPv6 route propagation. Amazon VPC Route Server simplifies routing for traffic between

Disables access to the EC2 serial console of all instances for your account. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account access to the EC2 serial console in the Amazon EC2 User Guide.

Disables the block public access for snapshots setting at the account level for the specified Amazon Web Services Region. After you disable block public access for snapshots in a Region, users can publicly share snapshots in that Region. Enabling block public access for snapshots in block-all-shari

Disables the specified resource attachment from propagating routes to the specified propagation route table.

Disables a virtual private gateway (VGW) from propagating routes to a specified route table of a VPC.

This action is deprecated. Disables ClassicLink for a VPC. You cannot disable ClassicLink for a VPC that has EC2-Classic instances linked to it.

This action is deprecated. Disables ClassicLink DNS support for a VPC. If disabled, DNS hostnames resolve to public IP addresses when addressed between a linked EC2-Classic instance and instances in the VPC to which it's linked. You must specify a VPC ID in the request.

Disassociates an Elastic IP address from the instance or network interface it's associated with. This is an idempotent operation. If you perform the operation more than once, Amazon EC2 doesn't return an error. An address cannot be disassociated if the all of the following conditions are met: Netw

Cancels a pending request to assign billing of the unused capacity of a Capacity Reservation to a consumer account, or revokes a request that has already been accepted. For more information, see Billing assignment for shared Amazon EC2 Capacity Reservations.

Disassociates a target network from the specified Client VPN endpoint. When you disassociate the last target network from a Client VPN, the following happens: The route that was automatically added for the VPC is deleted All active client connections are terminated New client connections are d

Disassociates an IAM role from an Certificate Manager (ACM) certificate. Disassociating an IAM role from an ACM certificate removes the Amazon S3 object that contains the certificate, certificate chain, and encrypted private key from the Amazon S3 bucket. It also revokes the IAM role's permission to

Disassociates an IAM instance profile from a running or stopped instance. Use DescribeIamInstanceProfileAssociations to get the association ID.

Disassociates one or more targets from an event window. For more information, see Define event windows for scheduled events in the Amazon EC2 User Guide.

Remove the association between your Autonomous System Number (ASN) and your BYOIP CIDR. You may want to use this action to disassociate an ASN from a CIDR or if you want to swap ASNs. For more information, see Tutorial: Bring your ASN to IPAM in the Amazon VPC IPAM guide.

Disassociates a resource discovery from an Amazon VPC IPAM. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Disassociates secondary Elastic IP addresses (EIPs) from a public NAT gateway. You cannot disassociate your primary EIP. For more information, see Edit secondary IP address associations in the Amazon VPC User Guide. While disassociating is in progress, you cannot associate/disassociate additional EI

Disassociates a route server from a VPC. A route server association is the connection established between a route server and a VPC. For more information see Dynamic routing in your VPC with VPC Route Server in the Amazon VPC User Guide.

Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route tables in the Amazon VPC User Guide.

Disassociates a security group from a VPC. You cannot disassociate the security group if any Elastic network interfaces in the associated VPC are still associated with the security group. Note that the disassociation is asynchronous and you can check the status of the request with DescribeSecurityGr

Disassociates a CIDR block from a subnet. Currently, you can disassociate an IPv6 CIDR block only. You must detach or delete all gateways and resources that are associated with the CIDR block before you can disassociate it.

Disassociates the specified subnets from the transit gateway multicast domain.

Removes the association between an an attachment and a policy table.

Disassociates a resource attachment from a transit gateway route table.

Removes an association between a branch network interface with a trunk network interface.

Disassociates a CIDR block from a VPC. To disassociate the CIDR block, you must specify its association ID. You can get the association ID by using DescribeVpcs. You must detach or delete all gateways and resources that are associated with the CIDR block before you can disassociate it. You cannot d

Enables Elastic IP address transfer. For more information, see Transfer Elastic IP addresses in the Amazon VPC User Guide.

Enables Allowed AMIs for your account in the specified Amazon Web Services Region. Two values are accepted: enabled: The image criteria in your Allowed AMIs settings are applied. As a result, only AMIs matching these criteria are discoverable and can be used by your account to launch instances.

Enables Infrastructure Performance subscriptions.

Enables EC2 Capacity Manager for your account. This starts data ingestion for your EC2 capacity usage across On-Demand, Spot, and Capacity Reservations. Initial data processing may take several hours to complete.

Enables EBS encryption by default for your account in the current Region. After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default KMS key or the KMS key that you specified when you created each volume. For more information, see Amazon EB

When you enable Windows fast launch for a Windows AMI, images are pre-provisioned, using snapshots to launch instances up to 65% faster. To create the optimized Windows image, Amazon EC2 launches an instance and runs through Sysprep steps, rebooting as required. Then it creates a set of reserved sna

Enables fast snapshot restores for the specified snapshots in the specified Availability Zones. You get the full benefit of fast snapshot restores after they enter the enabled state. For more information, see Amazon EBS fast snapshot restore in the Amazon EBS User Guide.

Re-enables a disabled AMI. The re-enabled AMI is marked as available and can be used for instance launches, appears in describe operations, and can be shared. Amazon Web Services accounts, organizations, and Organizational Units that lost access to the AMI when it was disabled do not regain access a

Enables block public access for AMIs at the account level in the specified Amazon Web Services Region. This prevents the public sharing of your AMIs. However, if you already have public AMIs, they will remain publicly available. The API can take up to 10 minutes to configure this setting. During thi

Enables deprecation of the specified AMI at the specified date and time. For more information, see Deprecate an AMI in the Amazon EC2 User Guide.

Enables deregistration protection for an AMI. When deregistration protection is enabled, the AMI can't be deregistered. To allow the AMI to be deregistered, you must first disable deregistration protection. For more information, see Protect an Amazon EC2 AMI from deregistration in the Amazon EC2 Use

Enable Amazon EC2 instances running in an SQL Server High Availability cluster for SQL Server High Availability instance standby detection monitoring. Once enabled, Amazon Web Services monitors the metadata for the instances to determine whether they are active or standby nodes in the SQL Server Hig

Enable an Organizations member account as the IPAM admin account. You cannot select the Organizations management account as the IPAM admin account. For more information, see Enable integration with Organizations in the Amazon VPC IPAM User Guide.

Enables an IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single policy can have multiple

Establishes a trust relationship between Reachability Analyzer and Organizations. This operation must be performed by the management account for the organization. After you establish a trust relationship, a user in the management account or a delegated administrator account can run a cross-account a

Defines which route tables the route server can update with routes. When enabled, route server propagation installs the routes in the FIB on the route table you've specified. Route server supports IPv4 and IPv6 route propagation. For more information see Dynamic routing in your VPC with VPC Route Se

Enables access to the EC2 serial console of all instances for your account. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account access to the EC2 serial console in the Amazon EC2 User Guide.

Enables or modifies the block public access for snapshots setting at the account level for the specified Amazon Web Services Region. After you enable block public access for snapshots in a Region, users can no longer request public sharing for snapshots in that Region. Snapshots that are already pub

Enables the specified attachment to propagate routes to the specified propagation route table.

Enables a virtual private gateway (VGW) to propagate routes to the specified route table of a VPC.

Enables I/O operations for a volume that had I/O operations disabled because the data on the volume was potentially inconsistent.

This action is deprecated. Enables a VPC for ClassicLink. You can then link EC2-Classic instances to your ClassicLink-enabled VPC to allow communication over private IP addresses. You cannot enable your VPC for ClassicLink if any of your VPC route tables have existing routes for address ranges wit

This action is deprecated. Enables a VPC to support DNS hostname resolution for ClassicLink. If enabled, the DNS hostname of a linked EC2-Classic instance resolves to its private IP address when addressed from an instance in the VPC to which it's linked. Similarly, the DNS hostname of an instance

Downloads the client certificate revocation list for the specified Client VPN endpoint.

Downloads the contents of the Client VPN endpoint configuration file for the specified Client VPN endpoint. The Client VPN endpoint configuration file includes the Client VPN endpoint and certificate information clients need to establish a connection with the Client VPN endpoint.

Exports an Amazon Machine Image (AMI) to a VM file. For more information, see Exporting a VM directly from an Amazon Machine Image (AMI) in the VM Import/Export User Guide.

Exports routes from the specified transit gateway route table to the specified S3 bucket. By default, all routes are exported. Alternatively, you can filter by CIDR range. The routes are saved to the specified bucket in a JSON file. For more information, see Export route tables to Amazon S3 in the A

Exports the client configuration for a Verified Access instance.

Returns the currently negotiated security parameters for an active VPN tunnel, including IKE version, DH groups, encryption algorithms, and integrity algorithms.

Gets the current state of the Allowed AMIs setting and the list of Allowed AMIs criteria at the account level in the specified Region. The Allowed AMIs feature does not restrict the AMIs owned by your account. Regardless of the criteria you set, the AMIs created by your account will always be disco

Returns the IAM roles that are associated with the specified ACM (ACM) certificate. It also returns the name of the Amazon S3 bucket and the Amazon S3 object key where the certificate, certificate chain, and encrypted private key bundle are stored, and the ARN of the KMS key that's used to encrypt t

Gets information about the IPv6 CIDR block associations for a specified IPv6 address pool.

Gets network performance data.

Retrieves the current configuration and status of EC2 Capacity Manager for your account, including enablement status, Organizations access settings, and data ingestion status.

Retrieves capacity usage metrics for your EC2 resources. Returns time-series data for metrics like unused capacity, utilization rates, and costs across On-Demand, Spot, and Capacity Reservations. Data can be grouped and filtered by various dimensions such as region, account, and instance family.

Retrieves the available dimension values for capacity metrics within a specified time range. This is useful for discovering what accounts, regions, instance families, and other dimensions have data available for filtering and grouping.

Gets usage information about a Capacity Reservation. If the Capacity Reservation is shared, it shows usage information for the Capacity Reservation owner and each Amazon Web Services account that is currently using the shared capacity. If the Capacity Reservation is not shared, it shows only the Cap

Describes the allocations from the specified customer-owned address pool.

Gets the console output for the specified instance. For Linux instances, the instance console output displays the exact console output that would normally be displayed on a physical monitor attached to a computer. For Windows instances, the instance console output includes the last three system even

Retrieve a JPG-format screenshot of a running instance to help with troubleshooting. The returned content is Base64-encoded. For more information, see Instance console output in the Amazon EC2 User Guide.

Retrieves a summary of the account status report. To view the full report, download it from the Amazon S3 bucket where it was saved. Reports are accessible only when they have the complete status. Reports with other statuses (running, cancelled, or error) are not available in the S3 bucket. For more

Describes the default credit option for CPU usage of a burstable performance instance family. For more information, see Burstable performance instances in the Amazon EC2 User Guide.

Describes the default KMS key for EBS encryption by default for your account in this Region. For more information, see Amazon EBS encryption in the Amazon EBS User Guide.

Describes whether EBS encryption by default is enabled for your account in the current Region. For more information, see Amazon EBS encryption in the Amazon EBS User Guide.

Gets the enabled IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single policy can have mul

Generates a CloudFormation template that streamlines and automates the integration of VPC flow logs with Amazon Athena. This make it easier for you to query and gain insights from VPC flow logs data. Based on the information that you provide, we configure resources in the template to do the followin

Lists the resource groups to which a Capacity Reservation has been added.

Preview a reservation purchase with configurations that match those of your Dedicated Host. You must have active Dedicated Hosts in your account before you purchase a reservation. This is a preview of the PurchaseHostReservation action and does not result in the offering being purchased.

Retrieves the ancestry chain of the specified AMI, tracing its lineage back to the root AMI. For more information, see AMI ancestry in Amazon EC2 User Guide.

Gets the current state of block public access for AMIs at the account level in the specified Amazon Web Services Region. For more information, see Block public access to your AMIs in the Amazon EC2 User Guide.

Gets the default instance metadata service (IMDS) settings that are set at the account level in the specified Amazon Web Services
 Region. For more information, see Order of precedence for instance metadata options in the Amazon EC2 User Guide.

Gets the public endorsement key associated with the Nitro Trusted Platform Module (NitroTPM) for the specified instance.

Returns a list of instance types with the specified instance attributes. You can use the response to preview the instance types without launching instances. Note that the response does not consider capacity. When you specify multiple parameters, you get instance types that satisfy all of the specifi

A binary representation of the UEFI variable store. Only non-volatile variables are stored. This is a base64 encoded and zlib compressed binary value that must be properly encoded. When you use register-image to create an AMI, you can create an exact copy of your variable store by passing the UEFI d

Retrieve historical information about a CIDR within an IPAM scope. For more information, see View the history of IP addresses in the Amazon VPC IPAM User Guide.

Gets IPAM discovered accounts. A discovered account is an Amazon Web Services account that is monitored under a resource discovery. If you have integrated IPAM with Amazon Web Services Organizations, all accounts in the organization are discovered accounts. Only the IPAM account can get all discover

Gets the public IP addresses that have been discovered by IPAM.

Returns the resource CIDRs that are monitored as part of a resource discovery. A discovered resource is a resource CIDR monitored under a resource discovery. The following resources can be discovered: VPCs, Public IPv4 pools, VPC subnets, and Elastic IP addresses.

Gets the allocation rules for an IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single pol

Gets the Amazon Web Services Organizations targets for an IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get I

Get a list of all the CIDR allocations in an IPAM pool. The Region you use should be the IPAM pool locale. The locale is the Amazon Web Services Region where this IPAM pool is available for allocations. If you use this action after AllocateIpamPoolCidr or ReleaseIpamPoolAllocation, note that all EC

Get the CIDRs provisioned to an IPAM pool.

Retrieves the CIDR selection rules for an IPAM prefix list resolver. Use this operation to view the business logic that determines which CIDRs are selected for synchronization with prefix lists.

Retrieves the CIDR entries for a specific version of an IPAM prefix list resolver. This shows the actual CIDRs that were selected and synchronized at a particular point in time.

Retrieves version information for an IPAM prefix list resolver. Each version is a snapshot of what CIDRs matched your rules at that moment in time. The version number increments every time the CIDR list changes due to infrastructure changes. Version example: Initial State (Version 1) Production

Returns resource CIDRs managed by IPAM in a given scope. If an IPAM is associated with more than one resource discovery, the resource CIDRs across all of the resource discoveries is returned. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to t

Retrieves the configuration data of the specified instance. You can use this data to create a launch template. This action calls on other describe actions to get instance information. Depending on your instance configuration, you may need to allow the following actions in your IAM policy: DescribeS

Gets information about the resources that are associated with the specified managed prefix list.

Gets information about the entries for a specified managed prefix list.

Gets the findings for the specified Network Access Scope analysis.

Gets the content for the specified Network Access Scope.

Retrieves the encrypted administrator password for a running Windows instance. The Windows password is generated at boot by the EC2Config service or EC2Launch scripts (Windows Server 2016 and later). This usually only happens the first time an instance is launched. For more information, see EC2Confi

Returns a quote and exchange information for exchanging one or more specified Convertible Reserved Instances for a new Convertible Reserved Instance. If the exchange cannot be performed, the reason is returned in the response. Use AcceptReservedInstancesExchangeQuote to perform the exchange.

Gets information about the associations for the specified route server. A route server association is the connection established between a route server and a VPC. For more information see Dynamic routing in your VPC with VPC Route Server in the Amazon VPC User Guide.

Gets information about the route propagations for the specified route server. When enabled, route server propagation installs the routes in the FIB on the route table you've specified. Route server supports IPv4 and IPv6 route propagation. Amazon VPC Route Server simplifies routing for traffic betwe

Gets the routing database for the specified route server. The Routing Information Base (RIB) serves as a database that stores all the routing information and network topology data collected by a router or routing system, such as routes learned from BGP peers. The RIB is constantly updated as new rou

Gets security groups that can be associated by the Amazon Web Services account making the request with network interfaces in the specified VPC.

Retrieves the access status of your account to the EC2 serial console of all instances. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account access to the EC2 serial console in the Amazon EC2 User Guide.

Gets the current state of block public access for snapshots setting for the account and Region. For more information, see Block public access for snapshots in the Amazon EBS User Guide.

Calculates the Spot placement score for a Region or Availability Zone based on the specified target capacity and compute requirements. You can specify your compute requirements either by using InstanceRequirementsWithMetadata and letting Amazon EC2 choose the optimal instance types to fulfill your S

Gets information about the subnet CIDR reservations.

Lists the route tables to which the specified resource attachment propagates routes.

Retrieves the entries for a transit gateway metering policy.

Gets information about the associations for the transit gateway multicast domain.

Gets a list of the transit gateway policy table associations.

Returns a list of transit gateway policy table entries.

Gets information about the prefix list references in a specified transit gateway route table.

Gets information about the associations for the specified transit gateway route table.

Gets information about the route table propagations for the specified transit gateway route table.

Get the Verified Access policy associated with the endpoint.

Gets the targets for the specified network CIDR endpoint for Verified Access.

Shows the contents of the Verified Access policy associated with the group.

Gets information about resources in a VPC that are blocking encryption enforcement. For more information, see Enforce VPC encryption in transit in the Amazon VPC User Guide.

Download an Amazon Web Services-provided sample configuration file to be used with the customer gateway device specified for your Site-to-Site VPN connection.

Obtain a list of customer gateway devices for which sample configuration files can be provided. The request has no additional parameters. You can also see the list of device types with sample configuration files available under Your customer gateway device in the Amazon Web Services Site-to-Site VPN

Get details of available tunnel endpoint maintenance.

Uploads a client certificate revocation list to the specified Client VPN endpoint. Uploading a client certificate revocation list overwrites the existing client certificate revocation list. Uploading a client certificate revocation list resets existing client connections.

To import your virtual machines (VMs) with a console-based experience, you can use the Import virtual machine images to Amazon Web Services template in the Migration Hub Orchestrator console. For more information, see the Migration Hub Orchestrator User Guide . Import single or multi-volume disk

We recommend that you use the ImportImage API instead. For more information, see Importing a VM as an image using VM Import/Export in the VM Import/Export User Guide. Creates an import instance task using metadata from the specified disk image. This API action supports only single-volume VMs. To

Imports the public key from an RSA or ED25519 key pair that you created using a third-party tool. You give Amazon Web Services only the public key. The private key is never transferred between you and Amazon Web Services. For more information about the requirements for importing a key pair, see Crea

Imports a disk into an EBS snapshot. For more information, see Importing a disk as a snapshot using VM Import/Export in the VM Import/Export User Guide.

This API action supports only single-volume VMs. To import multi-volume VMs, use ImportImage instead. To import a disk to a snapshot, use ImportSnapshot instead. Creates an import volume task using metadata from the specified disk image. For information about the import manifest referenced by this

Lists one or more AMIs that are currently in the Recycle Bin. For more information, see Recycle Bin in the Amazon EC2 User Guide.

Lists one or more snapshots that are currently in the Recycle Bin.

Lists one or more volumes that are currently in the Recycle Bin.

Locks an Amazon EBS snapshot in either governance or compliance mode to protect it against accidental or malicious deletions for a specific duration. A locked snapshot can't be deleted. You can also use this action to modify the lock settings for a snapshot that is already locked. The allowed modifi

Modifies an attribute of the specified Elastic IP address. For requirements, see Using reverse DNS for email applications.

Changes the opt-in status of the specified zone group for your account.

Modifies a Capacity Reservation's capacity, instance eligibility, and the conditions under which it is to be released. You can't modify a Capacity Reservation's instance type, EBS optimization, platform, instance store settings, Availability Zone, or tenancy. If you need to modify any of these attri

Modifies a Capacity Reservation Fleet. When you modify the total target capacity of a Capacity Reservation Fleet, the Fleet automatically creates new Capacity Reservations, or modifies or cancels existing Capacity Reservations in the Fleet to meet the new total target capacity. When you modify the e

Modifies the specified Client VPN endpoint. Modifying the DNS server resets existing client connections.

Modifies the default credit option for CPU usage of burstable performance instances. The default credit option is set at the account level per Amazon Web Services Region, and is specified per instance family. All new burstable performance instances in the account launch using the default credit opti

Changes the default KMS key for EBS encryption by default for your account in this Region. Amazon Web Services creates a unique Amazon Web Services managed KMS key in each Region for use with encryption by default. If you change the default KMS key to a symmetric customer managed KMS key, it is used

Modifies the specified EC2 Fleet. You can only modify an EC2 Fleet request of type maintain. While the EC2 Fleet is being modified, it is in the modifying state. To scale up your EC2 Fleet, increase its target capacity. The EC2 Fleet launches the additional Spot Instances according to the allocation

Modifies the specified attribute of the specified Amazon FPGA Image (AFI).

Modify the auto-placement setting of a Dedicated Host. When auto-placement is enabled, any instances that you launch with a tenancy of host but without a specific host ID are placed onto any available Dedicated Host in your account that has auto-placement enabled. When auto-placement is disabled, yo

Modifies the ID format for the specified resource on a per-Region basis. You can specify that resources should receive longer IDs (17-character IDs) when they are created. This request can only be used to modify longer ID settings for resource types that are within the opt-in period. Resources curre

Modifies the ID format of a resource for a specified IAM user, IAM role, or the root user for an account; or all IAM users, IAM roles, and the root user for an account. You can specify that resources should receive longer IDs (17-character IDs) when they are created. This request can only be used t

Modifies the specified attribute of the specified AMI. You can specify only one attribute at a time. To specify the attribute, you can use the Attribute parameter, or one of the following parameters: Description, ImdsSupport, or LaunchPermission. Images with an Amazon Web Services Marketplace produc

Modifies the specified attribute of the specified instance. You can specify only one attribute at a time. Note: Using this action to change the security groups associated with an elastic network interface (ENI) attached to an instance can result in an error if the instance has more than one ENI. To

Modifies the Capacity Reservation settings for a stopped instance. Use this action to configure an instance to target a specific Capacity Reservation, run in any open Capacity Reservation with matching attributes, run in On-Demand Instance capacity, or only run in a Capacity Reservation.

Modifies the specified EC2 Instance Connect Endpoint. For more information, see Modify an EC2 Instance Connect Endpoint in the Amazon EC2 User Guide.

By default, all vCPUs for the instance type are active when you launch an instance. When you configure the number of active vCPUs for the instance, it can help you save on licensing costs and optimize performance. The base cost of the instance remains unchanged. The number of active vCPUs equals the

Modifies the credit option for CPU usage on a running or stopped burstable performance instance. The credit options are standard and unlimited. For more information, see Burstable performance instances in the Amazon EC2 User Guide.

Modifies the start time for a scheduled Amazon EC2 instance event.

Modifies the specified event window. You can define either a set of time ranges or a cron expression when modifying the event window, but not both. To modify the targets associated with the event window, use the AssociateInstanceEventWindow and DisassociateInstanceEventWindow API. If Amazon Web Serv

Modifies the recovery behavior of your instance to disable simplified automatic recovery or set the recovery behavior to default. The default configuration will not enable simplified automatic recovery for an unsupported instance type. For more information, see Simplified automatic recovery. Modifie

Modifies the default instance metadata service (IMDS) settings at the account level in the specified Amazon Web Services
 Region. To remove a parameter's account-level default setting, specify no-preference. If an account-level setting is cleared with no-preference, then the instance launch

Modify the instance metadata parameters on a running or stopped instance. When you modify the parameters on a stopped instance, they are applied when the instance is started. When you modify the parameters on a running instance, the API responds with a state of “pending”. After the parameter modific

Change the configuration of the network performance options for an existing instance.

Modifies the placement attributes for a specified instance. You can do the following: Modify the affinity between an instance and a Dedicated Host. When affinity is set to host and the instance is not associated with a specific Dedicated Host, the next time the instance is started, it is automatic

Modify the configurations of an IPAM.

Modifies the allocation rules in an IPAM policy. An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single

Modify the configurations of an IPAM pool. For more information, see Modify a pool in the Amazon VPC IPAM User Guide.

Modifies an IPAM prefix list resolver. You can update the description and CIDR selection rules. Changes to rules will trigger re-evaluation and potential updates to associated prefix lists.

Modifies an IPAM prefix list resolver target. You can update version tracking settings and the desired version of the target prefix list.

Modify a resource CIDR. You can use this action to transfer resource CIDRs between scopes and ignore resource CIDRs that you do not want to manage. If set to false, the resource will not be tracked for overlap, it cannot be auto-imported into a pool, and it will be removed from any pool it has an al

Modifies a resource discovery. A resource discovery is an IPAM component that enables IPAM to manage and monitor resources that belong to the owning account.

Modify an IPAM scope.

Modifies a launch template. You can specify which version of the launch template to set as the default version. When launching an instance, the default version applies when a launch template version is not specified.

Modifies the specified local gateway route.

Modifies the specified managed prefix list. Adding or removing entries in a prefix list creates a new version of the prefix list. Changing the name of the prefix list does not affect the version. If you specify a current version number that does not match the true current version number, the request

Modifies the specified network interface attribute. You can specify only one attribute at a time. You can use this action to attach and detach security groups from an existing EC2 instance.

Modifies the options for instance hostnames for the specified instance.

Modify public hostname options for a network interface. For more information, see EC2 instance hostnames, DNS names, and domains in the Amazon EC2 User Guide.

Modifies the configuration of your Reserved Instances, such as the Availability Zone, instance count, or instance type. The Reserved Instances to be modified must be identical, except for Availability Zone, network platform, and instance type. For more information, see Modify Reserved Instances in t

Modifies the configuration of an existing route server. Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred

Modifies the rules of a security group.

Adds or removes permission settings for the specified snapshot. You may add or remove specified Amazon Web Services account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single operation. If you need to both add and remove account IDs for a snapshot, you must u

Archives an Amazon EBS snapshot. When you archive a snapshot, it is converted to a full snapshot that includes all of the blocks of data that were written to the volume at the time the snapshot was created, and moved from the standard tier to the archive tier. For more information, see Archive Amazo

Modifies the specified Spot Fleet request. You can only modify a Spot Fleet request of type maintain. While the Spot Fleet request is being modified, it is in the modifying state. To scale up your Spot Fleet, increase its target capacity. The Spot Fleet launches the additional Spot Instances accordi

Modifies a subnet attribute. You can only modify one attribute at a time. Use this action to modify subnets on Amazon Web Services Outposts. To modify a subnet on an Outpost rack, set both MapCustomerOwnedIpOnLaunch and CustomerOwnedIpv4Pool. These two parameters act as a single attribute. To mo

Allows or restricts mirroring network services. By default, Amazon DNS network services are not eligible for Traffic Mirror. Use AddNetworkServices to add network services to a Traffic Mirror filter. When a network service is added to the Traffic Mirror filter, all traffic related to that network s

Modifies the specified Traffic Mirror rule. DestinationCidrBlock and SourceCidrBlock must both be an IPv4 range or an IPv6 range.

Modifies a Traffic Mirror session.

Modifies the specified transit gateway. When you modify a transit gateway, the modified options are applied to new transit gateway attachments only. Your existing transit gateway attachments are not modified.

Modifies a transit gateway metering policy.

Modifies a reference (route) to a prefix list in a specified transit gateway route table.

Modifies the specified VPC attachment.

Modifies the configuration of the specified Amazon Web Services Verified Access endpoint.

Modifies the specified Amazon Web Services Verified Access endpoint policy.

Modifies the specified Amazon Web Services Verified Access group configuration.

Modifies the specified Amazon Web Services Verified Access group policy.

Modifies the configuration of the specified Amazon Web Services Verified Access instance.

Modifies the logging configuration for the specified Amazon Web Services Verified Access instance.

Modifies the configuration of the specified Amazon Web Services Verified Access trust provider.

You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For mo

Modifies a volume attribute. By default, all I/O operations for the volume are suspended when the data on the volume is determined to be potentially inconsistent, to prevent undetectable, latent data corruption. The I/O access to the volume can be resumed by first enabling I/O access and then checki

Modifies the specified attribute of the specified VPC.

Modify VPC Block Public Access (BPA) exclusions. A VPC BPA exclusion is a mode that can be applied to a single VPC or subnet that exempts it from the account’s BPA mode and will allow bidirectional or egress-only access. You can create BPA exclusions for VPCs and subnets even when BPA is not enabled

Modify VPC Block Public Access (BPA) options. VPC Block Public Access (BPA) enables you to block resources in VPCs and subnets that you own in a Region from reaching or being reached from the internet through internet gateways and egress-only internet gateways. To learn more about VPC BPA, see Block

Modifies the encryption control configuration for a VPC. You can update the encryption mode and exclusion settings for various gateway types and peering connections. For more information, see Enforce VPC encryption in transit in the Amazon VPC User Guide.

Modifies attributes of a specified VPC endpoint. The attributes that you can modify depend on the type of VPC endpoint (interface, gateway, or Gateway Load Balancer). For more information, see the Amazon Web Services PrivateLink Guide.

Modifies a connection notification for VPC endpoint or VPC endpoint service. You can change the SNS topic for the notification, or the events for which to be notified.

Modifies the attributes of the specified VPC endpoint service configuration. If you set or modify the private DNS name, you must prove that you own the private DNS domain name.

Modifies the payer responsibility for your VPC endpoint service.

Modifies the permissions for your VPC endpoint service. You can add or remove permissions for service consumers (Amazon Web Services accounts, users, and IAM roles) to connect to your endpoint service. Principal ARNs with path components aren't supported. If you grant permissions to all principals,

Modifies the VPC peering connection options on one side of a VPC peering connection. If the peered VPCs are in the same Amazon Web Services account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer

Modifies the instance tenancy attribute of the specified VPC. You can change the instance tenancy attribute of a VPC to default only. You cannot change the instance tenancy attribute to dedicated. After you modify the tenancy of the VPC, any new instances that you launch into the VPC have a tenancy

Modifies the customer gateway or the target gateway of an Amazon Web Services Site-to-Site VPN connection. To modify the target gateway, the following migration options are available: An existing virtual private gateway to a new virtual private gateway An existing virtual private gateway to a tr

Modifies the connection options for your Site-to-Site VPN connection. When you modify the VPN connection options, the VPN endpoint IP addresses on the Amazon Web Services side do not change, and the tunnel options do not change. Your VPN connection will be temporarily unavailable for a brief period

Modifies the VPN tunnel endpoint certificate.

Modifies the options for a VPN tunnel in an Amazon Web Services Site-to-Site VPN connection. You can modify multiple options for a tunnel in a single request, but you can only modify one tunnel at a time. For more information, see Site-to-Site VPN tunnel options for your Site-to-Site VPN connection

Enables detailed monitoring for a running instance. Otherwise, basic monitoring is enabled. For more information, see Monitor your instances using CloudWatch in the Amazon EC2 User Guide. To disable detailed monitoring, see UnmonitorInstances.

This action is deprecated. Moves an Elastic IP address from the EC2-Classic platform to the EC2-VPC platform. The Elastic IP address must be allocated to your account for more than 24 hours, and it must not be associated with an instance. After the Elastic IP address is moved, it is no longer avai

Move a BYOIPv4 CIDR to IPAM from a public IPv4 pool. If you already have a BYOIPv4 CIDR with Amazon Web Services, you can move the CIDR to IPAM from a public IPv4 pool. You cannot move an IPv6 CIDR to IPAM. If you are bringing a new IP address to Amazon Web Services for the first time, complete the

Move available capacity from a source Capacity Reservation to a destination Capacity Reservation. The source Capacity Reservation and the destination Capacity Reservation must be active, owned by your Amazon Web Services account, and share the following: Instance type Platform Availability Zo

Provisions an IPv4 or IPv6 address range for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised. Amazon Web Services verifies that you own the address r

Provisions your Autonomous System Number (ASN) for use in your Amazon Web Services account. This action requires authorization context for Amazon to bring the ASN to an Amazon Web Services account. For more information, see Tutorial: Bring your ASN to IPAM in the Amazon VPC IPAM guide.

Provision a CIDR to an IPAM pool. You can use this action to provision new CIDRs to a top-level pool or to transfer a CIDR from a top-level pool to a pool within it. For more information, see Provision CIDRs to pools in the Amazon VPC IPAM User Guide.

Provision a CIDR to a public IPv4 pool. For more information about IPAM, see What is IPAM? in the Amazon VPC IPAM User Guide.

Purchase the Capacity Block for use with your account. With Capacity Blocks you ensure GPU capacity is available for machine learning (ML) workloads. You must specify the ID of the Capacity Block offering you are purchasing.

Purchase the Capacity Block extension for use with your account. You must specify the ID of the Capacity Block extension offering you are purchasing.

Purchase a reservation with configurations that match those of your Dedicated Host. You must have active Dedicated Hosts in your account before you purchase a reservation. This action results in the specified reservation being purchased and charged to your account.

Purchases a Reserved Instance for use with your account. With Reserved Instances, you pay a lower hourly rate compared to On-Demand instance pricing. Use DescribeReservedInstancesOfferings to get a list of Reserved Instance offerings that match your specifications. After you've purchased a Reserved

You can no longer purchase Scheduled Instances. Purchases the Scheduled Instances with the specified schedule. Scheduled Instances enable you to purchase Amazon EC2 compute capacity by the hour for a one-year term. Before you can purchase a Scheduled Instance, you must call DescribeScheduledInstan

Requests a reboot of the specified instances. This operation is asynchronous; it only queues a request to reboot the specified instances. The operation succeeds if the instances are valid and belong to you. Requests to reboot terminated instances are ignored. If an instance does not cleanly shut dow

Registers an AMI. When you're creating an instance-store backed AMI, registering the AMI is the final step in the creation process. For more information about creating AMIs, see Create an AMI from a snapshot and Create an instance-store backed AMI in the Amazon EC2 User Guide. If needed, you can der

Registers a set of tag keys to include in scheduled event notifications for your resources. To remove tags, use DeregisterInstanceEventNotificationAttributes.

Registers members (network interfaces) with the transit gateway multicast group. A member is a network interface associated with a supported EC2 instance that receives multicast traffic. For more information, see Multicast on transit gateways in the Amazon Web Services Transit Gateways Guide. After

Registers sources (network interfaces) with the specified transit gateway multicast group. A multicast source is a network interface attached to a supported instance that sends multicast traffic. For more information about supported instances, see Multicast on transit gateways in the Amazon Web Serv

Rejects a request to assign billing of the available capacity of a shared Capacity Reservation to your account. For more information, see Billing assignment for shared Amazon EC2 Capacity Reservations.

Rejects a request to associate cross-account subnets with a transit gateway multicast domain.

Rejects a transit gateway peering attachment request.

Rejects a request to attach a VPC to a transit gateway. The VPC attachment must be in the pendingAcceptance state. Use DescribeTransitGatewayVpcAttachments to view your pending VPC attachment requests. Use AcceptTransitGatewayVpcAttachment to accept a VPC attachment request.

Rejects VPC endpoint connection requests to your VPC endpoint service.

Rejects a VPC peering connection request. The VPC peering connection must be in the pending-acceptance state. Use the DescribeVpcPeeringConnections request to view your outstanding VPC peering connection requests. To delete an active VPC peering connection, or to delete a VPC peering connection requ

Releases the specified Elastic IP address. [Default VPC] Releasing an Elastic IP address automatically disassociates it from any instance that it's associated with. Alternatively, you can disassociate an Elastic IP address without releasing it. [Nondefault VPC] You must disassociate the Elastic IP a

When you no longer want to use an On-Demand Dedicated Host it can be released. On-Demand billing is stopped and the host goes into released state. The host ID of Dedicated Hosts that have been released can no longer be specified in another request, for example, to modify the host. You must stop or t

Release an allocation within an IPAM pool. The Region you use should be the IPAM pool locale. The locale is the Amazon Web Services Region where this IPAM pool is available for allocations. You can only use this action to release manual allocations. To remove an allocation for a resource without del

Replaces an IAM instance profile for the specified running instance. You can use this action to change the IAM instance profile that's associated with an instance without having to disassociate the existing IAM instance profile first. Use DescribeIamInstanceProfileAssociations to get the association

Sets or replaces the criteria for Allowed AMIs. The Allowed AMIs feature does not restrict the AMIs owned by your account. Regardless of the criteria you set, the AMIs created by your account will always be discoverable and usable by users in your account. For more information, see Control the dis

Changes which network ACL a subnet is associated with. By default when you create a subnet, it's automatically associated with the default network ACL. For more information, see Network ACLs in the Amazon VPC User Guide. This is an idempotent operation.

Replaces an entry (rule) in a network ACL. For more information, see Network ACLs in the Amazon VPC User Guide.

Replaces an existing route within a route table in a VPC. You must specify either a destination CIDR block or a prefix list ID. You must also specify exactly one of the resources from the parameter list, or reset the local route to its default target. For more information, see Route tables in the Am

Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route tables in the Amazon VPC User Guide. You can

Replaces the specified route in the specified transit gateway route table.

Trigger replacement of specified VPN tunnel.

Submits feedback about the status of an instance. The instance must be in the running state. If your experience with the instance differs from the instance status returned by DescribeInstanceStatus, use ReportInstanceStatus to report your experience with the instance. Amazon EC2 collects this inform

Creates a Spot Fleet request. The Spot Fleet request specifies the total target capacity and the On-Demand target capacity. Amazon EC2 calculates the difference between the total capacity and On-Demand capacity, and launches the difference as Spot capacity. You can submit a single request that inclu

Creates a Spot Instance request. For more information, see Work with Spot Instance in the Amazon EC2 User Guide. We strongly discourage using the RequestSpotInstances API because it is a legacy API with no planned investment. For options for requesting Spot Instances, see Which is the best Spot req

Resets the attribute of the specified IP address. For requirements, see Using reverse DNS for email applications.

Resets the default KMS key for EBS encryption for your account in this Region to the Amazon Web Services managed KMS key for EBS. After resetting the default KMS key to the Amazon Web Services managed KMS key, you can continue to encrypt by a customer managed KMS key by specifying it when you create

Resets the specified attribute of the specified Amazon FPGA Image (AFI) to its default value. You can only reset the load permission attribute.

Resets an attribute of an AMI to its default value.

Resets an attribute of an instance to its default value. To reset the kernel or ramdisk, the instance must be in a stopped state. To reset the sourceDestCheck, the instance can be either running or stopped. The sourceDestCheck attribute controls whether source/destination checking is enabled. The de

Resets a network interface attribute. You can specify only one attribute at a time.

Resets permission settings for the specified snapshot. For more information about modifying snapshot permissions, see Share a snapshot in the Amazon EBS User Guide.

This action is deprecated. Restores an Elastic IP address that was previously moved to the EC2-VPC platform back to the EC2-Classic platform. You cannot move an Elastic IP address that was originally allocated for use in EC2-VPC. The Elastic IP address must not be associated with an instance or ne

Restores an AMI from the Recycle Bin. For more information, see Recover deleted Amazon EBS snapshots and EBS-back AMIs with Recycle Bin in the Amazon EC2 User Guide.

Restores the entries from a previous version of a managed prefix list to a new version of the prefix list.

Restores a snapshot from the Recycle Bin. For more information, see Restore snapshots from the Recycle Bin in the Amazon EBS User Guide.

Restores an archived Amazon EBS snapshot for use temporarily or permanently, or modifies the restore period or restore type for a snapshot that was previously temporarily restored. For more information see Restore an archived snapshot and modify the restore period or restore type for a temporarily

Restores a volume from the Recycle Bin. For more information, see Restore volumes from the Recycle Bin in the Amazon EBS User Guide.

Removes an ingress authorization rule from a Client VPN endpoint.

Removes the specified outbound (egress) rules from the specified security group. You can specify rules using either rule IDs or security group rule properties. If you use rule properties, the values that you specify (for example, ports) must match the existing rule's values exactly. Each rule has a

Removes the specified inbound (ingress) rules from a security group. You can specify rules using either rule IDs or security group rule properties. If you use rule properties, the values that you specify (for example, ports) must match the existing rule's values exactly. Each rule has a protocol, fr

Launches the specified number of instances using an AMI for which you have permissions. You can specify a number of options, or leave the default options. The following rules apply: If you don't specify a subnet ID, we choose a default subnet from your default VPC for you. If you don't have a defa

Launches the specified Scheduled Instances. Before you can launch a Scheduled Instance, you must purchase it and obtain an identifier using PurchaseScheduledInstances. You must launch a Scheduled Instance during its scheduled time period. You can't stop or reboot a Scheduled Instance, but you can te

Searches for routes in the specified local gateway route table.

Searches one or more transit gateway multicast groups and returns the group membership information.

Searches for routes in the specified transit gateway route table.

Sends a diagnostic interrupt to the specified Amazon EC2 instance to trigger a kernel panic (on Linux instances), or a blue screen/stop error (on Windows instances). For instances based on Intel and AMD processors, the interrupt is received as a non-maskable interrupt (NMI). In general, the operatin

Generates an account status report. The report is generated asynchronously, and can take several hours to complete. The report provides the current status of all attributes supported by declarative policies for the accounts within the specified scope. The scope is determined by the specified TargetI

Starts an Amazon EBS-backed instance that you've previously stopped. Instances that use Amazon EBS volumes as their root devices can be quickly stopped and started. When an instance is stopped, the compute resources are released and you are not billed for instance usage. However, your root partition

Starts analyzing the specified Network Access Scope.

Starts analyzing the specified path. If the path is reachable, the operation returns the shortest feasible path.

Initiates the verification process to prove that the service provider owns the private DNS name domain for the endpoint service. The service provider must successfully perform the verification before the consumer can use the name to access the service. Before the service provider runs this command,

Stops an Amazon EBS-backed instance. You can restart your instance at any time using the StartInstances API. For more information, see Stop and start Amazon EC2 instances in the Amazon EC2 User Guide. When you stop or hibernate an instance, we shut it down. By default, this includes a graceful opera

Terminates active Client VPN endpoint connections. This action can be used to terminate a specific client connection, or up to five connections established by a specific user.

Terminates (deletes) the specified instances. This operation is idempotent; if you terminate an instance more than once, each call succeeds. Terminating an instance is permanent and irreversible. After you terminate an instance, you can no longer connect to it, and it can't be recovered. All atta

Unassigns the specified IPv6 addresses or Prefix Delegation prefixes from a network interface.

Unassigns the specified secondary private IP addresses or IPv4 Prefix Delegation prefixes from a network interface.

Unassigns secondary private IPv4 addresses from a private NAT gateway. You cannot unassign your primary private IP. For more information, see Edit secondary IP address associations in the Amazon VPC User Guide. While unassigning is in progress, you cannot assign/unassign additional IP addresses whil

Unlocks a snapshot that is locked in governance mode or that is locked in compliance mode but still in the cooling-off period. You can't unlock a snapshot that is locked in compliance mode after the cooling-off period has expired.

Disables detailed monitoring for a running instance. For more information, see Monitoring your instances and volumes in the Amazon EC2 User Guide.

Updates the Organizations access setting for EC2 Capacity Manager. This controls whether Capacity Manager can aggregate data from all accounts in your Amazon Web Services Organization or only from the current account.

Modifies the number of instances allocated to an interruptible reservation, allowing you to add more capacity or reclaim capacity to your source Capacity Reservation.

Updates the description of an egress (outbound) security group rule. You can replace an existing description, or add a description to a rule that did not have one previously. You can remove a description for a security group rule by omitting the description parameter in the request.

Updates the description of an ingress (inbound) security group rule. You can replace an existing description, or add a description to a rule that did not have one previously. You can remove a description for a security group rule by omitting the description parameter in the request.

Stops advertising an address range that is provisioned as an address pool. You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time. It can take a few minutes before traffic to the specified addresses stops routing to Amazon Web Services be